BRAYER BR3401 - Инструкция по эксплуатации - Страница 10

10

EN

STEP 5 

• 

In the final stage of hair styling remove the installed 

attachment comb (10, 11, 12 or 13) from the clipper, 

turn the blades of the clipper towards the hair and trim 

hair on the temples and neck carefully. Before creating 

the contour, comb the hair above ears. Slightly bend 

back the person’s ear so it will not get in the way of 

cutting hair. Do not press the clipper strongly, there is 

danger of injuries or cuts when open blades come in 

contact with skin. 

• 

Notes:

 — without using the attachment combs (10, 

11, 12 or 13), for a short haircut, you can change the 

remaining hair length in the range from 1.0 mm to 1.9 

mm, to change the remaining hair length move the 

blade shifter (5) (pic. 5).

• 

After you finish cutting hair, switch the hair clipper off by 

pressing the button (4) «   ». 

•  Remove the installed attachment comb (pic. 4), clean it 

from hair, remove the blade block (6) (pic. 6) and clean 

it (pic. 7) with the brush (15). Clean the inner cavity 

under the blade block (6) (pic. 8). 

•  Lubricate the blade block (6) (pic. 2).

•  Install the blade block (6) back to the installation place 

(pic. 9). 

CLEANING AND  CARE 

• 

After you finish using the hair clipper, switch it off. If the 

hair clipper is powered by the adapter (9), unplug the 

power adapter (9) and disconnect the connecting cord 

jack of the adapter from the hair clipper body (pic. 1a). 

•  Remove the installed attachment comb (10, 11, 12 or 

13) (pic. 4) and clean it from hair with the brush (15). 

•  Remove the blade block (6) (pic. 6). 

•  Clean the blade block (6) (pic. 7) and the clipper 

inner cavity under the blade block (6) with the brush 

(15) (pic. 8). Do not wash the blade block (6) and the 

inner cavity of the hair clipper body under a water jet. 

•  Clean the hair clipper body with a soft, slightly damp 

cloth, and then wipe it dry. 

•  Do not use abrasives or solvents to clean the 

hair clipper body, the power adapter (9) and the 

attachment combs (10, 11, 12, 13). 

•  Never immerse the hair clipper, the power adapter 

(9) and the power adapter cord into water or other 

liquids. 

•  Lubricate the blade block (6) after every use with the 

lubricating oil (14). 

STORAGE 

•  Before taking the hair clipper set away for storage, 

clean the hair clipper body, the blade block (6) and 

the attachment combs (10, 11, 12, 13).

•  Lubricate the blade block (6) with lubricating oil (14). 

•  Keep the hair clipper set in a dry cool place out of 

reach of children and disabled persons.