Маршрутизаторы MikroTik LtAP LTE6 kit (RBLTAP-2HND R11E-LTE6) - инструкция пользователя по применению, эксплуатации и установке на русском языке. Мы надеемся, она поможет вам решить возникшие у вас вопросы при эксплуатации техники.
Если остались вопросы, задайте их в комментариях после инструкции.
"Загружаем инструкцию", означает, что нужно подождать пока файл загрузится и можно будет его читать онлайн. Некоторые инструкции очень большие и время их появления зависит от вашей скорости интернета.
Mounting
1. It is possible to attach the device to a wall, using the provided four screws and designed four holes on the
unit.
2. The ports are protected with a small door, that is held in place with two screws. Remove to access Ethernet
ports, antenna connector, SIM slots etc.
3. The door has cut-out places for all available ports, so you can guide though all necessary cables, but
please only break out the openings that you will use.
4. Several places for external antennas are provided on the case, use an appropriate size drill, to make them
available. Be careful and measure the chosen antenna, so that it does not touch the internal PCB board
when installed.
The device can be used both indoors and outdoors. The IP rating scale of IP54.
If you intend to mount outdoors, please ensure that any cable openings are directed downwards. The
Mounting direction is indicated on the device with an arrow pointing up. Use POE injector and proper
grounding. Recommended using Cat6 shielded cable.
Warning! This equipment should be installed and operated with a minimum distance of 30 cm between the
device and your body. Operation of this equipment in the residential environment could cause radio
interference.
The device enclosure has places where you can drill openings for external LTE and GPS antennas. Use a drill to
make holes that are appropriate for the antenna cable used.
Configuration
We recommend clicking the “Check for updates” button and updating your RouterOS software to the latest version
to ensure the best performance and stability. RouterOS includes many configuration options in addition to what is
described in this document. We suggest starting here to get yourself accustomed to the possibilities:
. In case IP connection is not available, the Winbox tool (
) can be used to connect
to the MAC address of the device from the LAN side (all access is blocked from the internet port by default). For
recovery purposes, it is possible to boot the device from a network, see the section Reset button.
See mikrotik.com/products for the latest version of this document.
Page 2, Document #49495 Modified on: 19.DEC.2019
Характеристики
Остались вопросы?Не нашли свой ответ в руководстве или возникли другие проблемы? Задайте свой вопрос в форме ниже с подробным описанием вашей ситуации, чтобы другие люди и специалисты смогли дать на него ответ. Если вы знаете как решить проблему другого человека, пожалуйста, подскажите ему :)
