Магнитолы Soundmax SM-CMD3009 - инструкция пользователя по применению, эксплуатации и установке на русском языке. Мы надеемся, она поможет вам решить возникшие у вас вопросы при эксплуатации техники.
Если остались вопросы, задайте их в комментариях после инструкции.
"Загружаем инструкцию", означает, что нужно подождать пока файл загрузится и можно будет его читать онлайн. Некоторые инструкции очень большие и время их появления зависит от вашей скорости интернета.
21
In TA mode traffic program will be automatically searched, until the program is received. When traffic
announcement is received the unit will temporarily switch to the tuner mode (regardless of the current
mode) and begin broadcasting the announcement. After the traffic announcement is over, it will return to
the previous mode and volume level. To interrupt traffic announcement press TA button shortly; it will not
switch off the TA mode.
PTY (Program Type)
This radio will allow you to select the type of program required, and will search for a station broadcasting
that type of program.
Press PTY/PLAY/PAUSE button on the panel or touch PTY icon on the screen to show the music type. Then
press 1 - 6 number buttons to choose different music programs available.
Press twice PTY/PLAY/PAUSE button on the panel or touch PTY icon on the screen to show the speech type
program. Then press 1 - 6 number buttons to choose different speech programs. Each number button will
show 2 or 3 different speech programs for you to choose (see table below).
Button
Music type programs
Speech type programs
1
Pop, Rock
News, Affairs, Info
2
Easy, Light
Sport, Educate, Drama
3
Classics
Culture, Science, Varied
4
Jazz, Country
Weather, Finance, Children
5
Nation, Oldies
Social, Religion, Phone IN
6
Folk
Travel, Leisure, Document
When PTY is selected, the radio starts to search corresponding PTY information, and stops if the
corresponding PTY information is detected. If no buttons are pressed within several seconds, previously
selected PTY is searched. During 1 loop, if desired PTY is not found, the unit will return to previous mode.
Press PTY/PLAY/PAUSE button on the panel or touch PTY icon on the screen for the 3rd time to switch the
PTY function off.
Other parameter setting
To choose the corresponding parameter, press and hold SELECT button on the panel or SEL button on the
RC, then press it repeatedly until the display shows the needed parameter. Press VOL+/VOL- buttons on the
