Магнитолы Soundmax SM-CMD2021 - инструкция пользователя по применению, эксплуатации и установке на русском языке. Мы надеемся, она поможет вам решить возникшие у вас вопросы при эксплуатации техники.
Если остались вопросы, задайте их в комментариях после инструкции.
"Загружаем инструкцию", означает, что нужно подождать пока файл загрузится и можно будет его читать онлайн. Некоторые инструкции очень большие и время их появления зависит от вашей скорости интернета.
18
APS (Auto memory store/ Preset scan) function
Preset scan: press APS button on the panel or AMS button on the RC to scan all preset stations in the
memory of the current band and stay on each memory stations for about 5 seconds. To stop preset
scan, press this button again. To listen to saved station press 1-6 buttons.
Auto memory store: press APS button on the panel for more than 2 seconds to enter auto store
mode. The radio will automatically store the 6 strongest available stations to the 6 preset memories of
the current band. To stop auto store, press this button again.
Stereo/ Mono mode
Press ST/PROG button on the RC to select Stereo or Mono.
OR press SEL button until ST is selected, rotate VOL knob to select Stereo or Mono.
Local/Distance control
Press LOC/RDM button on the RC to select LOC ON or LOC OFF mode.
Or press repeatedly SEL button until LOC is selected, rotate the VOL knob to select LOC ON or LOC OFF
mode. Local and distance reception setting can facilitate the radio reception, depending on the location in
which the radio is being used.
AF (Alternative Frequencies) function
Press the AF button on the panel to select AF ON or AF OFF.
When the radio signal strength is poor, enabling the AF function will allow the unit to automatically search
another station with the same PI (Program Identification) as the current station but with stronger signal
strength.
PS (Program Service name): the name of station will be display instead of frequency.
If RDS service is not available in your area, turn off the AF mode. Default setting is ON.
TA (Traffic Alarm) function
Press the TA button on the panel to select TA ON or TA OFF.
In TA mode traffic program will be automatically searched, until the program is received.
When traffic announcement is received the unit will temporarily switch to the tuner mode (regardless of the
current mode) and begin broadcasting the announcement. After the traffic announcement is over, it will
return to the previous mode and volume level.
