Soundmax SM-CDM1048 - Инструкция по эксплуатации - Страница 20

Магнитолы Soundmax SM-CDM1048 - инструкция пользователя по применению, эксплуатации и установке на русском языке. Мы надеемся, она поможет вам решить возникшие у вас вопросы при эксплуатации техники.

Если остались вопросы, задайте их в комментариях после инструкции.

"Загружаем инструкцию", означает, что нужно подождать пока файл загрузится и можно будет его читать онлайн. Некоторые инструкции очень большие и время их появления зависит от вашей скорости интернета.
Страница:
/ 55
Загружаем инструкцию
background image

20

EON TA DX/LOCAL: EON (Enhanced Other Networks)

This unit is equipped with the technology of EON control, so that when you are listening to Radio or CD, if

there  is  any  travel  announcement  from  a  nearby  local  station,  the  radio  will  already  know  the  frequency  of

that radio station. Then it will receive the station, turn up the volume, or interrupt the playback for the

duration of the announcement. At the end of the announcement the radio will return to its previous state

ready for the next announcement.

TA SEEK/TA ALARM

When newly tuned station does not receive TP information for 5 seconds, the radio retunes to next station

which has not the same station (PI – Program Information) as the last station, but has the TP information.

When  TP  information  gets  lost  at  the  current  station  for  retune  time  which  is  set  by  RETUNE  SHORT  (30

seconds)  or  RETUNE  LONG  (90  seconds),  the  radio  starts  to  retune  to  next  same  PI  station.  When  same  PI

station  does  not  catch  in  1  cyclic  search,  the  radio  retunes  to  next  station  with  TP  information.  In  TA  SEEK

mode, the unit will seek for traffic announcement program when TA button is pressed; in TA ALARM the unit

does not retune to TA information.

PI SOUND/MUTE

Choose either PI sound or PI mute. PI sound refers to the reception noise when the AF function tries to scan

alternative frequency.

MASK DPI/MASK ALL

During AF search, PI stations and non-RDS (Radio Data Station) stations with strong signal will be masked, in

the  latter  case,  the  non-RDS  stations  may  cause  interference,  resulting  the  real  AF  to  be  masked  due  to  the

misjudgment  of  the  radio  under  interference.  Rotate  VOL  regulator  on  the  front  panel  or  press  VOL+/VOL-

buttons on the RC to select the desired mode: MASK DPI and MASK ALL. During MASK DPI mode, the unit will

mask only the AF which has different PI, this is the default mode; during MASK ALL mode, the unit will mask

the AF which has different PI and no RDS signal with high field strength.

RETUNE S/L - SHORT/LONG

“RETUNE”  refers  to  the  time  period  the  unit  allows  for  radio  scan  when  reception  is  interrupted.  “S”

represents a time period of 30 seconds and “L” represents a time period of 90 seconds.

TA VOL

You can set the default volume of TA announcement.

AREA

Select radio broadcasting area Europe or USA.

Полезные видео

Характеристики

Оцените статью
tehnopanorama.ru
Остались вопросы?

Не нашли свой ответ в руководстве или возникли другие проблемы? Задайте свой вопрос в форме ниже с подробным описанием вашей ситуации, чтобы другие люди и специалисты смогли дать на него ответ. Если вы знаете как решить проблему другого человека, пожалуйста, подскажите ему :)

Задать вопрос

Часто задаваемые вопросы
Как посмотреть инструкцию к Soundmax SM-CDM1048?
Необходимо подождать полной загрузки инструкции в сером окне на данной странице
Руководство на русском языке?
Все наши руководства представлены на русском языке или схематично, поэтому вы без труда сможете разобраться с вашей моделью
Как скопировать текст из PDF?
Чтобы скопировать текст со страницы инструкции воспользуйтесь вкладкой "HTML"