Soundmax SM-CDM1048 - Инструкция по эксплуатации - Страница 17

17

Radio operations

Band selection

Press repeatedly BAND button to select your desired radio band in radio mode: FM1, FM2, FM3, FM4 (OIRT),

MW1 (AM1), MW2 (AM2). Each band can store 6 preset stations, for a total of 36 preset memory stations.

Tuning

Press

 or

 button; the unit will automatically search a nearest station with a strongl signal. To search next

station repeat this procedure. To stop the automatical search, press

 or

 button.

Press and hold

 or

  button  to  activate  manual  search  mode  (MANUAL  will  be  displayed).  Press

 or

buttons repeatedly to search for a station manually. If you don’t press any button within several seconds, the

unit will return to auto search mode.

Automatic store/Scan

Automatic store: Press and hold AMS button, the receiver will automatically find and save stations for the

current band.

Scan: Press AMS button once to scan the saved stations in 3 FM bands, OIRT band or 2 MW bands.

Programming stations

There are six numbered preset buttons, under which you can store and recall stations for each band. Select

the needed station, then press and hold a preset button. The station will be saved in the memory under the

corresponding number. To recall a stored station, press the corresponding preset button.

Mono/Stereo control (in FM radio mode)

Press SEL button repeatedly until the display shows STEREO (MONO). Rotate VOL regulator or press VOL+/-

buttons on the RC to switch between STEREO reception and MONO reception. Improvement of reception of

distant stations can be done by selecting mono mode, which may cut down some reception noise.

Local radio station search

Press SEL button repeatedly to choose LOCAL (DX). Rotate VOL regulator or press VOL+/- buttons on the RC

to switch between LOCAL and DX. When the LOCAL function is on, the local stations (stations with weak radio