Магнитолы Soundmax SM-CDM1048 - инструкция пользователя по применению, эксплуатации и установке на русском языке. Мы надеемся, она поможет вам решить возникшие у вас вопросы при эксплуатации техники.
Если остались вопросы, задайте их в комментариях после инструкции.
"Загружаем инструкцию", означает, что нужно подождать пока файл загрузится и можно будет его читать онлайн. Некоторые инструкции очень большие и время их появления зависит от вашей скорости интернета.
19
In TA mode traffic program will be automatically searched, until the program is received. When traffic
announcement is received the unit will temporarily switch to the tuner mode (regardless of the current mode)
and begin broadcasting the announcement. After the traffic announcement is over, it will return to the
previous mode and volume level. To interrupt traffic announcement press TA button shortly; it will not switch
off the TA mode.
PTY (Program Type)
This radio will allow you to select the type of program required, and will search for a station broadcasting that
type of program.
Press PTY button to show the music type. Then press 1 - 6 number buttons to choose different music
programs available. Press PTY button twice to show the speech type program. Then press 1 - 6 number
buttons to choose different speech programs. Each number button will show 3 different speech programs for
you to choose (see table below).
Button
Music type programs
Speech time programs
1
Pop, Rock
News, Affairs, Info
2
Easy, Light
Sport, Educate, Drama
3
Classics, Other
Culture, Science, Varied
4
Jazz, Country
Weather, Finance, Children
5
Nation, Oldies
Social, Religion, Phone IN
6
Folk
Travel, Leisure, Document
When PTY is selected, the radio starts to search corresponding PTY information, and stops if the
corresponding PTY information is detected. If no buttons are pressed within several seconds, previously
selected PTY is searched. During 1 loop, if desired PTY is not found, the unit will return to previous mode.
Press PTY button for the 3rd time to switch the PTY function off.
Other parameter setting
To choose the corresponding parameter, press and hold SEL button, then press it repeatedly until the display
shows the needed parameter. Turn VOL regulator on the front panel or press VOL+/VOL- buttons on the RC
to choose the needed value. After choosing, please leave the unit idle to activate.
