Sony XAV-C1 - Инструкция по эксплуатации - Страница 36

36

Other settings 

— OTHER

♦

AUX 3

You can set the function of the AUX3 jack.
When you connect the back camera to AUX3
jack, set to “Back Camera”. To adjust the
position of the back camera while viewing
the image of the camera, set to “Normal”.

Normal

• Select this when you connect the

other components other than back
camera to AUX3 jack.

• Select this to test view while

connecting the back camera.
You can adjust the position of the
back camera while viewing the
image of the camera without setting
the shift lever to the “R(reverse)”
position. However, note that the
image of the camera will be
displayed only when the parking
brake is set.

Back Camera

Select this when you connect the back
camera to AUX3 jack.

♦

Switching the NTSC/PAL system

You can switch the NTSC/PAL system of the
back camera in the AUX 3 mode.
Press and hold SEEK + of the main unit for 3
seconds while in AUX3 mode. The short beep
sounds and NTSC/PAL system is now
switched.

NTSC

Switches the back camera to NTSC
system.

PAL

Switches the back camera to PAL
system.

Note

This setting is available also when AUX 3 is set to
“Normal”.

♦

PBC On

Switching on and off the PBC function of
VCDs. Available only when VCD is stopped.

PBC On

Turns on the PBC function.

PBC Off

Turns off the PBC function.

Using the System Menu

♦

Demo

Switching on and off the Demo mode. The
Demo screen is displayed only when the
power is off.

Demo On

Turns on the Demo mode.

Demo Off

Turns off the Demo mode.

Tip

The default settings are underlined.

♦

Touch Panel Adjust

If the touching position does not correspond
with the proper item, you will need to adjust
the touch panel position.
Touch 1, 2 and 3 of the touch panel in order.

2

1

3