JVC KW-XG707 - Инструкция по эксплуатации - Страница 37

ENGLISH

37

REFERENCES

Continued on the next page

Symptom

Remedy/Cause

MP3/WMA/AAC

•  Tracks do not play back in the order you have 

intended them to play.

Playback order is determined when files are recorded.

•  Elapsed playing time is not correct.

This sometimes occurs during play. This is caused by how 
the tracks are recorded on the disc.

•  “PLEASE” and “EJECT” appear alternately on 

the display.

Insert a disc that contains MP3/WMA/AAC tracks.

•  Correct characters are not displayed (e.g. 

album name).

This unit can only display letters (Roman and Cyrillic 
alphabets—upper case), numbers, and a limited number 
of symbols.

USB device

•  Noise is generated.

The track played back is not an MP3/WMA/AAC/WAV 
track. Skip to another file. (Do not add the extension code 
<.mp3>, <.wma>, <.m4a>, or <.wav> to non-MP3/
WMA/AAC/WAV tracks.)

•  “CHECK” keeps flashing on the display.

•  Readout time varies depending on the USB device.
•  Do not use too many hierarchy, folders, and empty 

folders*.

•  Turn off the power then on again.

* 

Folder that is physically empty or folder that contains 
data but does not contain valid MP3/WMA/AAC/WAV 
track.

•  “NO FILE” flashes on the display.
•  “NO USB” appears on the display.

Attach a USB device that contains tracks encoded in an 
appropriate format.

•  “READ” and “FAILED” appear alternately on 

the display.

The total number of tracks could not be accessed properly.

•  Correct characters are not displayed (e.g. 

album name).

This unit can only display letters (Roman and Cyrillic 
alphabets—upper case), numbers, and a limited number 
of symbols.

•  While playing a track, sound is sometimes 

interrupted.

MP3/WMA/AAC/WAV tracks have not been properly 
copied into the USB device.
Copy MP3/WMA/AAC/WAV tracks again into the USB 
device, and try again.