JVC KW-XG707 - Инструкция по эксплуатации - Страница 27

ENGLISH

27

SETTINGS

3

  Select or adjust the selected PSM item.

4

  Repeat steps 2 and 3 to adjust other PSM 

items if necessary.

5

  Finish the procedure.

You can change PSM (Preferred Setting Mode) items 
listed in the table below and on pages 28 and 29.

1

  Enter the PSM settings.

2

  Select a PSM item.

Continued on the next page

*

1

  When you adjust the bass, mid-range, treble, or loudness, the adjustment you have made is stored for the currently 

selected sound mode (iEQ) including “USER.”

*

2

  If you are using a two-speaker system, set the fader level to “00.”

*

3

  The adjustment will not affect the subwoofer output.

*

4

  Depending on the amplifier gain control setting. (See page 29 for details.)

General settings — PSM

Indication

Item

(       : Initial)

 Setting, [reference page]

DEMO

Display demonstration

• 

DEMO ON

• 

DEMO OFF

:  Display demonstration will be activated automatically if no 

operation is done for about 20 seconds, [4].

:  Cancels.

SCREEN

Spectrum analyzer 
screen

METER 1,

METER 2,
METER 3, 
METER 4,
METER 5, 
SAVER 1,
SAVER 2, OFF

:  You can select the different visual effect display during playback.
  METER 1 – METER 5:  The spectrum analyzer meter changes 

according to the audio input level.

  SAVER 1 – SAVER 2:  The spectrum analyzer meter changes the 

pattern repeatedly.

  OFF: 

Cancels.

CLK DISP 

*

1

Clock display

• 

ON

• 

OFF

:  Clock time is shown on the display at all times when the power is 

turned off.

:   Cancels; pressing DISP will show the clock time for about 5 seconds 

when the power is turned off, [4].

*

1

  If the power supply is not interrupted by turning off the ignition key of your car, it is recommended to select “OFF” to 

save the car’s battery.