JVC KW-AVX820 - Инструкция по эксплуатации - Страница 20

20

ENGLISH

Menu item

Selectable setting/item

Fader/Balance

Back

Fader/Balance

Reset

Fader       0
Balance   0

Fader

 : Adjust the front and rear speaker output balance.

♦

 F6 

to

 R6; 

Initial 

0

•  When using a two-speaker system, set the fader to the center (

0

).

Balance

 : Adjust the left and right speaker output balance.

♦

 L6 

to

 R6; 

Initial 

0

Press [ 

5

/

∞

/

2

/

3

 ] or drag [ 

 ] to adjust.

Volume Adjust 

*

1

Adjust and store the auto-adjustment volume level for each source, comparing 
to the FM volume level. The volume level will automatically increase or decrease 
when you change the source.
• <

Fix

> appears if an FM broadcast is selected as the source.

♦

 –12 

to

 +12

;

Initial 

00

Subwoofer Level 

Adjust the subwoofer output level.

♦

 –06 

to

 +08; 

Initial 

00

High Pass Filter

♦

 Through

♦

 On

:

Select when the subwoofer is not connected.

:

Select when the subwoofer is connected.

Crossover

Select the crossover frequency between the front/rear speakers and the 
subwoofer.

♦

 80Hz, 120Hz, 150Hz

Amplifier Gain 

*

2

You can change the maximum volume level of this unit.

♦

 Off

♦

 Low

♦

 High

:

Deactivates the built-in amplifier.

:

VOL 00 to 30 (Select this if the maximum power of the 
speakers is less than 50 W.)

:

VOL 00 to 50

Rear Speaker 

*

3

You can activate/deactivate the rear speakers.

♦

 On

♦

 Off

:

Activate the rear speakers.

:

Deactivate the rear speakers.

*

1 

For “

DISC/USB

”: You can make the adjustments separately depending on the audio format—Dolby digital/MPEG 

Audio and the others.

*

2 

The volume level automatically changes to “VOL 30” if you change to <

Low

> with the volume level set higher than 

“VOL 30.”

*

3 

This setting takes effect only when Dual Zone is activated. (

40)

Initial: 

Underlined

Sound