JVC KW-AVX706 - Инструкция по эксплуатации - Страница 55

ENGLISH

55

Troubleshooting

What appears to be trouble is not always serious. Check the following points before calling a service 
center.

Symptoms

Remedies/Causes

General

•  No sound comes out of the center speaker.

Center speaker is used only for surround playback. No sound 
comes out for stereo playback.

•  No sound comes out of the subwoofer while 

playing in stereo.

This happens while playing some discs with “Auto” selected 
for “Surround On” (

☞

 pages 23 and 48). Cancel surround.

•  The monitor is not clear and legible for 

watching the playback picture.

Sunshine from the windshield may cause this symptom.
Adjust “Bright” and “Contrast” of “Screen Control.” (

☞

page 43).

•  Remote controller does not work.

Deactivate Dual Zone (

☞

 page 26).

(While Dual Zone is activated, the remote controller only 
functions for operating the DVD/CD player.)

•  “Position Error Push Open Key” appears on the 

monitor.

The monitor panel angle has been forcibly adjusted, or 
interrupted while opening or closing. Press OPEN/CLOSE.

•  “Mecha Error Push Reset” appears on the 

monitor, and the panel does not move.

Reset the unit (

☞

 page 2).

•  “SD Loading Error” appears on the monitor.

SD is not inserted fully. Fully insert it into the slot to close 
the monitor panel.

•  The unit does not work at all.

Reset the unit (

☞

 page 2).

FM/AM

•  SSM automatic presetting does not work.

Store stations manually.

•  Static noise while listening to the radio.

Connect the aerial firmly.

Disc playback

•  Disc can be neither recognized nor played .

Eject the disc forcibly (

☞

 page 2).

•  Disc cannot be ejected.

Unlock the disc (

☞

 page 19).

•  Recordable/Rewritable discs cannot be played 

back.

•  Tracks on the Recordable/Rewritable discs 

cannot be skipped.

•  Insert a finalized disc.
•  Finalize the discs with the component which you used for 

recording.

•  “Disc Error Please Eject” appears on the 

monitor.

Insert the disc correctly again.

•  “Eject Error” or “Loading Error” appears on the 

monitor.

Changing the source by pressing SOURCE will solve this 
error.

•  Sound and pictures are sometimes interrupted 

or distorted.

•  Stop playback while driving on rough roads.
•  Change the disc.

•  No playback picture appears on the monitor.

Parking brake wire is not connected properly. (

☞

Installation/Connection Manual.)

•  “Region Error Please Eject” appears on the 

monitor when you insert a DVD Video.

Region code is not correct (

☞

 page 5).