JVC KD-G847 - Инструкция по эксплуатации - Страница 37

ENGLISH

37

REFERENCES

Symptoms

Remedies/Causes

USB device

•  “No File” flashes on the display.
•  “No USB” appears on the display.

Connect a USB device that contains tracks encoded in an 
appropriate format.

•  “Not Support” appears on the display and 

track skips.

The track is unplayable.

•  “Read failed” appears on the display.

The connected USB device may be malfunctioning, 
or may not have been formatted correctly. The files 
included in the USB device are corrupted.

•  Correct characters are not displayed (e.g. 

album name).

For available characters, see page 2.

•  While playing a track, sound is sometimes 

interrupted.

The tracks have not been properly copied into the USB 
device. Copy tracks again into the USB device, and try 
again.

•  The sound is interrupted or skipped during 

playback of a USB device.

•  Turn off, then turn on the unit.
•  Connect the device again, when the sound is not yet 

restored.

Bluetooth 

®

•  Bluetooth device does not detect the unit.

The unit can be connected with one Bluetooth cellular 
phone and one Bluetooth audio device at a time.
While connecting a device, this unit cannot be detected 
from another device. Disconnect currently connected 
device and search again.

•  The unit does not detect the Bluetooth 

device.

•  Check the Bluetooth setting of the device.
•  Search from the Bluetooth device. After the device 

detects the unit, select “Open...” on the unit to connect 
the device. (See page 14.)

•  The unit does not make pairing with the 

Bluetooth device.

•  Enter the same PIN code for both the unit and target 

device.

•  Select the device name from “Special,” then try to 

connect again. (See page 15.)

•  Phone sound quality is poor.

•  Reduce the distance between the unit and the 

Bluetooth cellular phone.

•  Move the car to a place where you can get a better 

signal reception.

•  The sound is interrupted or skipped during 

playback of a Bluetooth audio player.

•  Reduce the distance between the unit and the 

Bluetooth audio player.

•  Disconnect the device connected for “BT-PHONE.”
•  Turn off, then turn on the unit.
•  Connect the player again, when the sound is not yet 

restored.

•  The connected audio player cannot be 

controlled.

Check whether the connected audio player supports 
AVRCP (Audio Video Remote Control Profile).
(Operations depend on the connected audio player.)

Continued on the next page