JVC KD-G847 - Инструкция по эксплуатации - Страница 35

ENGLISH

35

REFERENCES

•  The text information may not be displayed correctly:
  –  Some characters such as accented letters cannot be 

shown correctly on the display.

  –  Communication between the iPod and the unit is 

not stable.

•  If the text information includes more than 

16 characters, it scrolls on the display. This unit can 
display up to 128 characters.

Notice:

When operating an iPod, some operations may not 
be performed correctly or as intended. In this case, 
visit the following JVC web site: <http://www.jvc.
co.jp/english/car/support/ks-pd100/index.html>

  General settings—PSM

•  “Auto” setting for “Dimmer” may not work correctly 

on some vehicles, particularly on those having a 
control dial for dimming.

Troubleshooting

What appears to be trouble is not always serious. Check the following points before calling a service center.

Symptoms

Remedies/Causes

General

•  Sound cannot be heard from the speakers.

•  Adjust the volume to the optimum level.
•  Check the cords and connections.

•  The unit does not work at all.

Reset the unit (see page 3).

•  “Connect Error” appears on the display.

Remove the control panel, wipe the connector, then 
attach it again (see page 38).

FM/AM

•  SSM automatic presetting does not work.

Store stations manually.

•  Static noise while listening to the radio.

Connect the aerial firmly.

Disc playback

•  Disc cannot be played back.

Insert the disc correctly.

•  CD-R/CD-RW cannot be played back.
•  Tracks on the CD-R/CD-RW cannot be 

skipped.

•  Insert a finalized CD-R/CD-RW.
•  Finalize the CD-R/CD-RW with the component which 

you used for recording.

•  Disc can neither be played back nor ejected. •  Unlock the disc (see page 11).

•  Eject the disc forcibly (see page 3).

  In this case, change the “Dimmer” setting to any 

other than “Auto.”

•  If “LCD Type” is set to “Auto,” the display pattern 

will change to the “Positive” or “Negative” pattern 
depending on the “Dimmer” setting.

•  If you change the “Amp Gain” setting from 

“High PWR” to “Low PWR” while the volume level is 
set higher than “Volume 30,” the unit automatically 
changes the volume level to “Volume 30.”

Available PTY codes

News, Affairs, Info, Sport, Educate, Drama, Culture, 
Science, Varied, Pop M (music), Rock M (music), 
Easy M (music), Light M (music), Classics, Other 
M (music), Weather, Finance, Children, Social, 
Religion, Phone In, Travel, Leisure, Jazz, Country, 
Nation M (music), Oldies, Folk M (music), Document

Continued on the next page