JVC KD-G647 - Инструкция по эксплуатации - Страница 19

19

ENGLISH

You can connect an external component to the 
AUX (auxiliary) input jack on the control panel.

~

Ÿ

  Turn on the connected component and 

start playing the source.

!

  Adjust the volume.

⁄

  Adjust the sound as you want. (See 

page 16.)

To check the other information while 
listening to an external component

Other external component operations

Indications

Item

(       : Initial)

Selectable settings, [reference page]

L/O MODE

Line output mode

• 

REAR

• 

SUB.W

:  Select if the REAR LINE OUT terminals are used for connecting the 

speakers (through an external amplifier).

:  Select if the REAR LINE OUT terminals are used for connecting a 

subwoofer (through an external amplifier).

SUB.W FREQ 

*

6

Subwoofer cutoff 
frequency

• 

LOW

• 

MID

• 

HIGH

:   Frequencies lower than 90 Hz are sent to the subwoofer.
:   Frequencies lower than 135 Hz are sent to the subwoofer.
:   Frequencies lower than 180 Hz are sent to the subwoofer.

TAG DISPLAY

Tag display

• 

TAG ON

• 

TAG OFF

:  Shows the Tag information while playing MP3/WMA tracks, [13].
:   Cancels.

AMP GAIN

Amplifier gain 
control

• 

LOW POWER

• 

HIGH POWER

:  VOLUME 00 – VOLUME 30 (Select this if the maximum power of the 

speaker is less than 50 W to avoid them from damaging the speaker.)

:  VOLUME 00 – VOLUME  50

IF BAND

Intermediate 
frequency band

• 

AUTO

• 

WIDE

:  Increases the tuner selectivity to reduce interference noise between 

close stations. (The stereo effect may be lost.)

:  Subject to the interference noise from adjacent stations, but the 

sound quality will not be degraded and the stereo effect will remain.

*

6

  Displayed only when “L/O MODE” is set to “SUB.W.”

AUX IN 

Ô

 Clock

3.5 mm stereo mini 
plug (not supplied)

Portable audio player, etc