JVC KD-G447 - Инструкция по эксплуатации - Страница 20

20

ENGLISH

•  This unit can play back MP3/WMA files meeting the 

conditions below:

  –  Bit rate of MP3: 16 kbps — 320 kbps
  –  Sampling frequency of MP3:
    48 kHz, 44.1 kHz, 32 kHz (for MPEG-1)
    24 kHz, 22.05 kHz, 16 kHz (for MPEG-2)
    12 kHz, 11.025 kHz, 8 kHz (for MPEG-2.5)
  –  Bit rate of WMA:
    16 kbps — 32 kbps 

(Sampling frequency: 22.05 kHz)

    32 kbps — 320 kbps

(Sampling frequency: 48 kHz, 44.1 kHz, 32 kHz)

•  This unit can play back MP3 files recorded in VBR 

(variable bit rate).

•  The maximum number of characters for:
  –  Folder names : 25 characters
  –  File names : 25 characters
  –  MP3 Tag : 128 characters
  –  WMA Tag : 64 characters
•  This unit can recognize a total of 2 500 files, 255 

folders (999 files per folder), and of 8 hierarchies.

•  This unit does not support SD card reader.
•  This unit cannot recognize a USB device whose rating 

is other than 5 V and exceeds 500 mA.

•  USB devices equipped with special functions such as 

data security functions cannot be used with the unit.

•  Do not use a USB device with 2 or more partitions.
•  This unit may not recognized a USB device connected 

through a USB card reader.

•  This unit may not play back files in a USB device 

properly when using a USB extension cord.

•  This unit cannot play back the following files:
  –  MP3 files encoded with MP3i and MP3 PRO format.
  –  MP3 files encoded in an inappropriate format.
  –  MP3 files encoded with Layer 1/2.
  –  WMA files encoded in lossless, professional, and 

voice format.

  –  WMA files not based on Windows Media® Audio.

Changing the source

•  If you change the source, playback also stops.
  Next time you select the same source again, playback 

starts from where it has been stopped previously.

Ejecting a disc or removing a USB device

•  If the ejected disc is not removed within 15 seconds, 

it is automatically inserted into the loading slot again 
to protect it from dust.

•  After ejecting a disc or removing a USB device, 

“NO DISC” or “NO USB“ appears and you cannot 
operate some of the buttons. Insert another disc, 
reattach a USB device, or press SRC to select another 
playback source.

General settings—PSM 

•  If you change the “AMP GAIN” setting from 

“HIGH POWER” to “LOW POWER” while the 
volume level is set higher than “VOLUME 30,” the 
unit automatically changes the volume level to 
“VOLUME 30.”

Available characters on the display

Available characters

Display indications