JVC KD-G427 - Инструкция по эксплуатации - Страница 9

9

ENGLISH

!

  Start searching for your favorite 

programme.

If there is a station broadcasting a 
programme of the same PTY code as you 
have selected, that station is tuned in.

Storing your favorite programme 

types

You can store six favorite programme types.

Preset programme types in the number buttons 
(1 to 6):

1

  Select a PTY code (see page 8).

2

  Select the preset number (1 – 6) you 

want to store into.

3

  Repeat steps 

1

 and 

2

 to store other 

PTY codes into other preset numbers.

4

  Finish the procedure.

Ex.: When “ROCK M” is selected

Using the standby receptions

  TA Standby Reception

TA Standby Reception allows the unit to switch 
temporarily to Traffic Announcement (TA) 
from any source other than AM. 
The volume changes to the preset TA volume 
level if the current level is lower than the preset 
level (see page 15).

To activate TA Standby Reception

The TP (Traffic Programme) 
indicator either lights up or 
flashes.

•  If the TP indicator lights up, TA Standby 

Reception is activated.

•  If the TP indicator flashes, TA Standby 

Reception is not yet activated. (This occurs 
when you are listening to an FM station 
without the RDS signals required for TA 
Standby Reception.)

  To activate TA Standby Reception, tune in to 

another station providing these signals. The 
TP indicator will stop flashing and remain lit.

To deactivate the TA Standby Reception

The TP indicator goes off.

  PTY Standby Reception

PTY Standby Reception allows the unit to 
switch temporarily to your favorite PTY 
programme from any source other than AM.

To activate and select your favorite PTY code 
for PTY Standby Reception,

 see page 15.

The PTY indicator either lights up or flashes.
•  If the PTY indicator lights up, PTY Standby 

Reception is activated.

•  If the PTY indicator flashes, PTY Standby 

Reception is not yet activated.

  To activate PTY Standby Reception, tune in 

to another station providing these signals. The 
PTY indicator will stop flashing and remain 
lit.

To deactivate the PTY Standby Reception,

select “OFF” for the PTY code (see page 15). 
The PTY indicator goes off.