JVC KD-DV7407 - Инструкция по эксплуатации - Страница 40

ENGLISH

40

Selecting a preset sound mode

You can select a preset sound mode suitable to the music genre (iEQ: intelligent equalizer).

1

Enter the setting menu.

2

Select “EQ.”

3

Select “On.”

•  If “Bypass” is selected, you can listen to the original 

sound mode recorded. 

 lights up on the 

display.

4

Select a preset sound mode.

  Adjusting the sound

You can adjust the sound characteristics to your 
preference.
•  When 

 is shown on the display, you can 

move back to the previous screen by pressing number 
button 3 or 6.

1

2

  •  For “EQ” setting, see above.

3

  Adjust the selected setting item.

A

Fad/Bal (Fader/Balance)

1

  Press number button 1 ( 

 ) 

to move to the “Fad/Bal” adjustment 
display.

2

  Adjust the speaker output balance by 

pressing:

5

 / 

∞

: between the front and rear 

speakers. [F6 to R6]

4

/

¢

: between the left and 

right speakers. [L6 to R6]

B

Subwoofer

1

  Press number button 1 ( 

 ) to 

move to the “Subwoofer” adjustment 
display.

2

  Use 

4

/

¢

 to select a cutoff 

frequency to the subwoofer.

•  Off *:  All signals are sent to the 

subwoofer.

•  55Hz:  Frequencies higher than 55 Hz 

are cut off.

•  85Hz:  Frequencies higher than 85 Hz 

are cut off.

•  120Hz:  Frequencies higher than 120 Hz 

are cut off.

3

  Turn the control dial to adjust the 

subwoofer output level. [0 to 8]

4

  Press number button 1 ( 

 ) to 

move to another setting level.

4

/

¢

: select the quality of 

LPF. [–12dB/oct or –24dB/oct]

Control dial: Turn the control dial to select 
the subwoofer phase. [0deg (normal) or 
180deg (reverse)]