JVC KD-DV7407 - Инструкция по эксплуатации - Страница 28

ENGLISH

28

Listening to the Bluetooth ® devices

For Bluetooth operations, it is required to connect the 

Bluetooth Adapter

 (KS-BTA200) to the CD changer 

jack on the rear of this unit.
•  Refer also to the instructions supplied with the 

Bluetooth adapter and the Bluetooth device.

•  Refer to the list (included in the box) to check 

the countries where you may use the Bluetooth ® 
function.

To use a Bluetooth device through the unit 
(“BT-PHONE” and “BT-AUDIO”) for the first time, 
you need to establish Bluetooth wireless connection 
between the unit and the device.
•  Once the connection is established, it is registered in 

the unit even if you reset your unit. Up to five devices 
can be registered in total.

•  Only one device can be connected at a time for each 

source (“BT-PHONE” and “BT-AUDIO”).

  Registering a Bluetooth device

Registration (Pairing) methods

Use either of the following items in the Bluetooth menu 
to register and establish the connection with a device.
•  Select “BT-PHONE” or “BT-AUDIO” as the source to 

operate the Bluetooth menu.

Open

Make the unit ready to establish a new 
Bluetooth connection.
Connection is established by operating the 
Bluetooth device.

Search

Make the unit ready to establish a new 
Bluetooth connection. 
Connection is established by operating 
the unit.

•  When 

 is shown on the display, you can 

move back to the previous screen by pressing number 
button 3.

Registering using “Open”

Preparation:

 Operate the device to turn on its 

Bluetooth function.

1

  Select “BT-PHONE” or “BT-AUDIO.”

2

  Select “New.”

3

  Enter setting menu.

4

  Select “Open.”

5

  Enter a PIN (Personal Identification Number) 

code to the unit.

    •  You can enter any number you like (1-digit to 

16-digit number). [Initial: 0000]

    •  To enter a PIN code less than 4-digit, firstly 

delete the initial PIN code (0000) by pressing 
number button 5 ( 

 ).

    * 

Some devices have their own PIN code. Enter the 
specified PIN code to the unit.

1

  Move to the next (or previous) number 

position.