JVC KD-DV7307 - Инструкция по эксплуатации - Страница 50

ENGLISH

50

  General

Turning on the power

•  By pressing SRC on the unit, you can also turn on the 

power. If the source is ready, playback also starts.

  FM/AM/RDS

Storing stations in memory

•  During SSM search...
  –  Received stations are preset in No. 1 (lowest 

frequency) to No. 6 (highest frequency).

  –  When SSM is over, the station stored in No. 1 will 

be automatically tuned in.

•  When storing stations, the previously preset stations 

are erased and stations are stored newly.

FM RDS operations

•  Network-Tracking Reception requires two types of 

RDS signals—PI (Programme Identification) and AF 
(Alternative Frequency) to work correctly. Without 
receiving these data correctly, Network-Tracking 
Reception will not operate correctly.

•  If a Traffic Announcement is received by TA Standby 

Reception, the volume level automatically changes to 
the preset level (TA VOL) if the current level is lower 
than the preset level.

•  When Alternative Frequency Reception is activated 

(with AF selected), Network-Tracking Reception is 
also activated automatically. On the other hand, 
Network-Tracking Reception cannot be deactivated 
without deactivating Alternative Frequency 
Reception. (See page 44.)

•  If you want to know more about RDS, visit 

<http://www.rds.org.uk>.

More about this unit

  Disc/USB

General

•  In this manual, words “track” and “file” are 

interchangeably used.

•  This unit can also play back 8 cm discs.
•  This unit can only play back audio CD (CD-DA) files if 

different type of files are recorded in the same disc.

•  This unit can display only one-byte characters. No 

other characters can be correctly displayed.

•  When a disc is inserted upside down, “PLEASE” and 

“EJECT” appear alternately on the display. Press 

0

 to 

eject the disc.

•  If the ejected disc is not removed within 15 seconds, 

the disc is automatically inserted again into the 
loading slot to protect it from dust. Playback starts 
automatically.

•  After ejecting a disc or removing a USB device, 

“NO DISC” or “NO USB” appears and you cannot 
operate some of the buttons. Insert another disc, 
reattach a USB device, or press SRC to select another 
playback source.

•  If you change the source, playback also stops. 
  Next time you select the same source again, playback 

starts from where it has been stopped previously.

•  While playing from a USB device, the playback order 

may differ from other players.

•  This unit is compatible with the USB Full-Speed.
•  Depending on the shape of the USB devices and 

connection ports, some USB devices may not be 
attached properly or the connection might be loose.

•  When connecting a USB device, refer also to its 

instructions.

•  Connect one USB device to the unit at a time. Do not 

use a USB hub.

•  If the connected USB device does not have the correct 

files, “NO FILE” appears.