Hyundai Electronics H-CMD4001G - Инструкция по эксплуатации - Страница 19

19

Operation

When you enter color setting menu, 

following interface will be displayed:

1

2

3

4

1. Parameter list. Touch a parameter to 

select it. Saturation, brightness, contrast, 
sharpness and hue are available for 
adjustment.

2. Increase/decrease buttons. Touch to 

increase or decrease the value.

3. Touch to reset your adjustment to default 

values.

4. Touch to quit color setting.
You can also press cursor buttons on the RC 

to select and adjust parameters.

DVD setup

Press SETUP button on the RC to go to 

DVD setup menu. Press cursor buttons on 
the RC to select parameters and options for 
adjustment, press ENTER button to confirm 
your selection. You can also touch needed 
items on the screen as follows:

1

2 3

1. Parameter list. Touch a parameter to 

select it.

2. Touch to select 1 or 2 menu page.
3. Option list button. Touch to open option 

list for corresponding parameter.

Following parameters are available for 

adjustment:

•  OSD lang: Select on-screen display 

language.

•  Subtitle lang: Select a DVD subtitle 

language.

•  Audio lang: select a language of the DVD 

audio.

•  DVD menu lang: Select a language of the 

DVD menu.

•  Password: In order to make the Rating 

feature work, the password mode must be 
turned on. If you want to set the ratings limit, 
you will need to enter the default password, 
which is 0000, then press ENTER to confirm. 
To change the password, enter the Password 
change submenu. If you change the password, 
the default password 0000 will be void.

•  Rating: The Rating control level is for 

parents to control playing content and protect 
your children from violence and erotic. The 
disc, the level of which is higher than the 
setting level can not be played.

•  TV shape: Select 4:3/PS (the wide-screen 

image shows on the full screen, but some 
part is cut off), 4:3/LB (the wide-screen image 
shows and black bars appear on the top and 
bottom of screen), Wide (wide-screen image is 
shown).

•  NTSC/PAL: Select color system NTSC or 

PAL.

•  Default: Reset to the initial factory settings.

Play/pause

The unit will automatically play from the first 

sound track recorded on a disc/SD/MMC/USB 
device. To ensure good system performance, 
wait until the unit finishes reading the disc/
device information before proceeding. Press 

 button on the RC or 3/

 button on the 

panel to pause playback, press it again to 
resume playback.