Hyundai Electronics H-CMD4001G - Инструкция по эксплуатации - Страница 15

15

Operation

the nearest station upwards.

Band selection

Select the RADIO mode. Press BAND button 

on the panel or BND/RDM button on the RC to 
select the desired band: FM1, FM2, FM3, AM1 
(MW1), AM2 (MW2).

Manual/automatic tuning

•  Manual tuning: press TUN-/TUN+ buttons 

on the panel or SEEK-/

 and SEEK+/

on the RC and hold for 2 seconds to enter 
the manual tuning mode. Press these buttons 
repeatedly to select a frequency downward or 
upward step by step.

•  Automatic tuning: press TUN-/TUN+ 

buttons on the panel or SEEK-/

 and 

SEEK+/

 on the RC repeatedly, the 

automatic search will start. It will play when 
finds the station.

Programming tuner stations

There are 6 numbered preset buttons on the 

RC and panel, with which you can store and 
recall stations for each band (18 FM, 12 AM). 
Select a station, then press and hold a preset 
button. The station will be saved in the memory 
under the corresponding number. To recall a 
stored station, press the corresponding preset 
button.

Auto memory store/Preset scan

Auto store: Select a band, press and hold 

AMS button on the panel or P.SCN/RPT button 
on the RC to enter auto store mode. The radio 
will automatically store 6 stations to the 6 
preset memories of the current band. To stop 
auto store, press the button again.

  During auto station preset, the unit will 

search and store stations with the strong signal 
first, and then weaker signal stations until the 
memories are full.

Preset scan: Select a band, press AMS 

button on the panel or P.SCN/RPT button 
on the RC to scan all preset stations in the 
memories of the current band. To stop preset 

scan, press the button again.

RDS function

RDS (Radio Data System) service availability 

varies with areas. Please understand if RDS 
service is not available in you area, the 
following service is not available, either.

AF (Alternative frequencies) function

Press AF/TA button on the RC or AF/REG 

button on the panel to enable AF function. 
When the radio signal strength is poor, 
enabling the AF function will allow the unit to 
automatically search another station with the 
same PI (Program Identification) as the current 
station but with stronger signal strength.

  AF indicator on the display will flash until 

RDS information is received. If RDS service is 
not available in your area, turn off the AF mode.

TA (Traffic alarm) function

Press TA/EON button on the panel to 

activate the traffic alarm function.

When TA function is activated, it will search 

the station with TA information automatically. 
If there is no TA information, it will search the 
station with TP information automatically, if 
there is no TP information either, it will return to 
the previous station after searching.

When receiving the station with TP 

information but without TA information, 
TP icon is on and TA icon keeps blinking; 
when receiving the station with TP and TA 
information, both TP and TA icons are on.

When playing in other mode and TA 

information is received, it will change to the 
radio mode automatically. After playing over, 
it will return to the previous mode. Press TA/
EON button on the panel once to ignore the 
received TA information, do it twice to turn off 
the function.

PTY (Program type) function

Press PTY button on the RC to activate 

the PTY function, press it repeatedly to show 
Music group/Speech group/PTY off. Choose