Магнитолы Hyundai Electronics H-CDM8056 - инструкция пользователя по применению, эксплуатации и установке на русском языке. Мы надеемся, она поможет вам решить возникшие у вас вопросы при эксплуатации техники.
Если остались вопросы, задайте их в комментариях после инструкции.
"Загружаем инструкцию", означает, что нужно подождать пока файл загрузится и можно будет его читать онлайн. Некоторые инструкции очень большие и время их появления зависит от вашей скорости интернета.
14
Radio operations
BAND selection
Press BAND/SUB button repeatedly to select your desired radio band during RADIO mode: FM1, FM2, FM3, AM1(MW1),
AM2(MW2). Each band can store 6 preset stations, for a total of 30 preset memory stations.
Tuning
In Radio mode press NEXT/PREVIOUS buttons to manually adjust the radio frequency. Press and hold the buttons for 3 seconds once
and radio will seek the next strong and clear frequency station. Repeat to seek more stations in your listening area with a strong signal.
Mono/Stereo control (in FM radio mode)
Press SEL button until the display shows “ST ON” or “ST OFF” (MONO). Press VOLUME+/- buttons to switch between ON or OFF.
Improvement of reception of distant stations can be done by selecting “MONO” operation which may cut down some reception noise.
Automatic store, Automatic scan
During listening to the radio press and hold the F/PS button for more than 3 seconds. The receiver will automatically scan and
save stations for the AM/FM bands.
Press F/PS button once in Radio mode to scan the stations in all bands.
Programming tuner stations
You can store up to a total of 30 radio stations in the memory (18 FM, 12 AM), manually or automatically.
To store a station:
Select a band (if needed).
Select a station by NEXT/PREVIOUS buttons.
Press and hold a numbered button (1-6) that you want store the station for at least 2 seconds.
To recall a station:
Select a band (if needed).
Press a Preset button (1-6) briefly to recall the stored station.
