Hyundai Electronics H-CDM8026 - Инструкция по эксплуатации - Страница 11

11

Operation

Audio parameter setting

Press repeatedly SEL/

 button to select 

bass, treble, balance or fader mode. The 
corresponding word appears on the display. 
Rotate VOLUME knob or press 

/

buttons on the RC to adjust the selected 
parameter. When EQ is on, treble and bass 
control is not available. Balance is to adjust the 
balance between the left and right speakers. 
Fader is to adjust the balance between the rear 
and front speakers.

In each mode, the waiting time is several 

seconds, and the waiting time is over, it 
returns to the last display mode of radio or disc 
playback mode.

Beep

Press repeatedly SEL/

 button to select 

BEEP ON; rotate VOLUME knob or press 

/

 buttons on the RC to toggle between BEEP 

ON (beep sound will be heard when buttons are 
pressed) and BEEP OFF, then leave the unit 
idle for the new setting to take effect.

Equalizer modes

Press repeatedly SEL/

 button to select 

EQ. Rotate VOLUME knob or press 

/

buttons on the RC to choose an equalizer 
effect: CLASS => ROCK => POP => FLAT 
=> OFF. After you have reached the desired 
effect, leave the unit idle in order for the new 
setting to take effect.

Loudness

Press repeatedly SEL/

 button to select 

LOUD ON (LOUD OFF). Rotate VOLUME 

knob or press 

/

 buttons on the RC to 

select between LOUD ON/LOUD OFF. LOUD 
function is to emphasize the bass output; the 
word LOUD ON indicates that the LOUD mode 
is on.

Color

Press repeatedly SEL/

 button to select 

COLOR1 (COLOR2). Rotate VOLUME knob 

or press 

/

 buttons on the RC to select 

between COLOR1 (red panel backlight) or 
COLOR2 (green color backlight).

Clock setting

The clock can be set anytime when the 

power is on. Press three times 

 button on 

the RC or press PTY/CLK button on the unit, 
then press and hold the button for 3 seconds; 
the time indication will blink on the display. 
Rotate VOLUME knob or press 

/

buttons on the RC to adjust hours. Press SEL/

 button to go to setting minutes. Rotate 

VOLUME knob or press 

/

 buttons on 

the RC to adjust minutes. Press 

 button on 

the RC or PTY/CLK button on the unit for the 
new setting to take effect.

Press 

 button on the RC or PTY/CLK 

button on the unit anytime to view the time 
display.

Subwoofer control

Press and hold BND/SUB button to turn the 

subwoofer output ON. An external amplifier is 
required to operate a subwoofer.

AUX in jack

AUX-in jack is intended for connecting an 

external audio or video equipment to amplify 
the sound. If connection is made correctly, the 
audio signal from the external source will be 
translated through the acoustics of the head 
unit. This enables to adjust the volume and 
quality of the sounding. For example, you can 
connect an MP3-player to listen to tracks using 
the car acoustic system.