Hyundai Electronics H-CCR8191M - Инструкция по эксплуатации - Страница 9

Operation

9

General operations

Turning the unit on/off

Press  /TFT OFF button on the 

panel to turn the unit on. Press and 
hold the button to turn the unit off.

Reset the unit

Operating the unit for the first time 

or after replacing the car battery, you 
must reset the unit. Press RESET 
button (hole) with a pointed object 
(such as a ballpoint pen) to set the 
unit to initial state.

  When some errors occur, 

you can also press RESET button to 
resume to normal, and it will erase 
clock setting and some memorized 
functions.

TFT display on/off

When the unit is on, press  /TFT 

OFF button on the panel to switch off 
the display. When the display is off, 
the video out signal will be available 
so that the connected monitor will 
show the screen of the unit. Press this 
button again to resume the image.

Mode selection

•  Press repeatedly MOD button on 

the panel to select between Radio, 
USB, Memory Card and auxiliary input 
(AUX), operation modes. Modes of 
operation are indicated on the display. 
Memory card and USB modes are not 
available unless a memory card or 
USB device is connected.

•  Or, in radio or AUX modes, press 

 button on the panel to display the 

main menu. In the menu select an 
operation mode by rotating VOLUME 
knob on the panel, then SELECT 
button on the panel to confirm 
selection.

Volume control

Adjust volume by rotating VOLUME 

knob on the panel.

Mute function

Press MUT button on the panel to 

switch off the sound; press it again or 
adjust volume to resume the sound.

Audio parameter setting

Press SELECT button on the panel 

repeatedly to select a parameter: 
VOL (volume) => BAS (bass) => TRE 
(treble) => BAL (balance) => FAD 
(fader) => EQ (equalizer) => Beep => 
Loud ON/OFF. Rotate VOLUME knob 
on the panel or pressing V+/V- buttons 
on the RC to adjust each mode:

•  Volume: from 0 to 39;
•  Bass/Treble: from -7 to 7;
•  Balance: L7 (left) to R7 (right);
•  Fader: from R7 (rear) to F7 (front);
•  EQ: select OFF/POP/ROCK/

CLASSIC equalizer mode;

•  Beep on: the beep sound is heard 

when a button is pressed; beep off: 
the sound is not heard;

•  Loudness: select ON or OFF. 

Activating this feature will enhance 
bass and treble frequencies when 
listening to music at low volumes.

  When equalizer is in any mode 

except OFF, bass and treble are not 
adjustable.