Hyundai Electronics H-CCR8187M - Инструкция по эксплуатации - Страница 11

Operation

11

except OFF, bass and treble are not 
adjustable.

Clock

Press CLK/OSD button on the RC 

to display the time on the screen in 
USB and memory card modes (in 
radio and AUX modes the clock is 
displayed permanently).

Aux input

AUX-in jack is intended for 

connecting external audio equipment 
to amplify the sound. If connection is 
made correctly, the audio signal from 
the external source will be translated 
through the acoustics of the head unit. 
This enables to adjust volume and 
quality of sounding. For example, you 
can connect an MP3-player to listen to 
tracks using the car acoustic system.

System setup

In radio or AUX modes, press   

button on the panel or 

 button on 

the RC to display the main menu. 
Rotate VOLUME knob on the panel 
or press UP/DOWN cursor buttons 
on the RC to select SETUP item, 
then press OK button on the RC 
or SELECT button on the panel to 
confirm selection The system setup 
menu will be displayed, in which you 
can adjust some system parameters. 
Rotate VOLUME knob on the panel 
or press UP/DOWN cursor buttons on 
the RC to select a parameter:

•  Language. Press SELECT button 

on the panel or OK button on the RC, 
then rotate VOLUME knob or press 
LEFT/RIGHT cursor buttons on the 
RC to select the menu language. 
Press SELECT button on the panel or 

OK button on the RC to confirm your 
selection.

•  Date. Rotate VOLUME knob or 

press UP/DOWN cursor buttons on 
the RC to select year, month or day. 
Press SELECT button on the panel or 
OK button on the RC to confirm your 
selection, then rotate VOLUME knob 
or press LEFT/RIGHT cursor buttons 
on the RC to adjust the selected 
parameter. After adjustment press 
SELECT button on the panel or OK 
button on the RC to confirm.

•  Time. Rotate VOLUME knob or 

press UP/DOWN cursor buttons on 
the RC to select hours, minutes or 
seconds. Press SELECT button on 
the panel or OK button on the RC to 
confirm your selection, then rotate 
VOLUME knob or press LEFT/RIGHT 
cursor buttons on the RC to adjust the 
selected parameter. After adjustment 
press SELECT button on the panel or 
OK button on the RC to confirm.

•  Brightness. Press SELECT button 

on the panel or OK button on the RC, 
then rotate VOLUME knob or press 
LEFT/RIGHT cursor buttons on the 
RC to adjust the image brightness. 
Press SELECT button on the panel or 
OK button on the RC to confirm.

•  Reset. Press SELECT button on 

the panel or OK button on the RC, 
then rotate VOLUME knob or press 
LEFT/RIGHT cursor buttons on the RC 
to select YES (resetting of all user’s 
adjustments to default) or NO (cancel). 
Press SELECT button on the panel or 
OK button on the RC to confirm.