Hyundai Electronics H-CCR4702M - Инструкция по эксплуатации - Страница 11

11

Operation

unit. Press reset button on the unit with a 
pointed object (such as a ballpoint pen) to set 
the unit to initial state.

  When some errors occur on the display, 

you can also press reset button to resume to 
normal, and it will erase the clock setting and 
some memorized functions.

Volume control

Press VOL+/VOL- buttons on the RC or on 

the unit to increase/decrease the sound level.

Setting the sound characteristics

Press SEL button to switch between the 

following settings: Volume->BAS->TRE->BAL-

>FA->EQ->LOUD.

Mute function

Press MUTE button on the RC or PWR 

button on the unit to turn off the sound. Press 

the button again or adjust volume to resume 

the sound output.

Mode selection

•  Repeatedly press MODE button on the 

RC or on the panel to select a mode: Radio =>  

USB => SD => TV => AV-in.

•  In any mode touch right top corner of the 

screen or press MENU button to display the 

Main menu as follows:

In the menu, touch the item of the mode you 

need to select the corresponding mode.

  The USB and SD modes are only 

available when a USB or SD/MMC card is 

inserted into the unit.

Angle setting

Press repeatedly TILT button on the front 

panel to adjust the desired angle of the 

monitor.

  Please do not adjust the monitor tilt 

manually, otherwise it can get damaged.

Press IN/OUT button to slide the screen 

back and forth.

AV in jack

AV jack is intended to receive audio and video 

signals by connecting to external device.

Subwoofer

Connect a subwoofer to this unit using the 

Subwoofer output of this unit. For subwoofer 

operation an external amplifier is required.

System setup

Sound presets

Press SEL button to switch between modes:

•  Volume: Adjust the sound volume level.

•  Bass: Adjust the low-frequency level.

•  Treble: Adjust the high-frequency level.

•  Balance: Adjust the balance between left 

and right channels.

•  Fader: Adjust the balance between front 

and left channels.

•  EQ: Select Flat, Classic, Pop, Rock or 

User equalizer mode.

•  Loud: Selecting loudness ON will 

emphasize the low frequency output.

Settings page