Hyundai Electronics H-1411 - Инструкция по эксплуатации - Страница 7

Магнитолы Hyundai Electronics H-1411 - инструкция пользователя по применению, эксплуатации и установке на русском языке. Мы надеемся, она поможет вам решить возникшие у вас вопросы при эксплуатации техники.

Если остались вопросы, задайте их в комментариях после инструкции.

"Загружаем инструкцию", означает, что нужно подождать пока файл загрузится и можно будет его читать онлайн. Некоторые инструкции очень большие и время их появления зависит от вашей скорости интернета.
Страница:
/ 16
Загружаем инструкцию
background image

7

Program mode

·

Up to 20 tracks can be programmed for disc play in any order or the same track can be repeated up to 20 times. Before use, be sure to press the

STOP/STEREO (ON/OFF) button.

·

Press the MEMORY/REPEAT/PROG button, the track number will flash on the display.

·

Select a desired track by using the BACK/TUNE DOWN AND NEXT/TUNE UP buttons.

·

Press the MEMORY/REPEAT/PROG button to confirm.

·

Repeat steps described above to enter additional memories into the program if necessary.

·

After a maximum of 20 songs (or less) have been selected as described above, press the MEMORY/REPEAT/PROG button.

·

The display will now show the exact song sequence in memory by displaying all the song numbers rapidly.

·

Also, the program led-light will remain "on" to indicate that you have saved a program-memory (sequence).

·

When all the desired tracks have been programmed, press PLAY button to play the disc in the order you have programmed.

·

To stop the CD, press the STOP/STEREO (ON/OFF) button.

NOTE:

 The program memory will be cleared when you press STOP/STEREO (ON/OFF) button twice or turn off the CD or power supply.

·

To remove the CD from the unit open the CD door.

·

To turn off the CD player set FUNCTION switch to TAPE position.

MP3 operation

·

Set FUNCTION switch to CD (MP3) position.

·

Open the CD door. Put a MP3 disk into the CD compartment and close the CD door.

·

The disk will spin and perform a full check of the disc to count the total number of songs. Then playback of the first song (track) will begin and the

display will indicate the current track no: (001).

·

At any time during playback, press and release BACK/TUNE DOWN AND NEXT/TUNE UP buttons to skip backwards or forwards by one track.

·

MP3 discs often have  folder  (sub-directories) which contain groups of songs.

·

If your MP3-CD has no folders, you can use the "skip +10/folder" button to jump 10 songs ahead. This is useful if you have many songs on you want to

quickly jump to a particular song.

·

Press "skip +10/folder" several times until you reach a song number near to your desired song, and then press "back" or "next" repeatedly to arrive and

the exact song you desire.

(note: the "skip +10" function only works on MP3-discs which have no folders).

·

If your MP3-CD has folders, you can select the folder to playback by pressing the button.

·

Each time you press the "skip +10/folder" button, the player jumps to the first song in the next folder.

(note: the "folder" function only works on MP3-discs which have folders. If your disc has no folders, pressing will perform the "skip +10" function).

Note: Good quality sound is guaranteed only when playing licensed MP3 discs.

Полезные видео

Характеристики

Оцените статью
tehnopanorama.ru
Остались вопросы?

Не нашли свой ответ в руководстве или возникли другие проблемы? Задайте свой вопрос в форме ниже с подробным описанием вашей ситуации, чтобы другие люди и специалисты смогли дать на него ответ. Если вы знаете как решить проблему другого человека, пожалуйста, подскажите ему :)

Задать вопрос

Часто задаваемые вопросы
Как посмотреть инструкцию к Hyundai Electronics H-1411?
Необходимо подождать полной загрузки инструкции в сером окне на данной странице
Руководство на русском языке?
Все наши руководства представлены на русском языке или схематично, поэтому вы без труда сможете разобраться с вашей моделью
Как скопировать текст из PDF?
Чтобы скопировать текст со страницы инструкции воспользуйтесь вкладкой "HTML"