Магнитолы Hyundai Electronics H-1411 - инструкция пользователя по применению, эксплуатации и установке на русском языке. Мы надеемся, она поможет вам решить возникшие у вас вопросы при эксплуатации техники.
Если остались вопросы, задайте их в комментариях после инструкции.
"Загружаем инструкцию", означает, что нужно подождать пока файл загрузится и можно будет его читать онлайн. Некоторые инструкции очень большие и время их появления зависит от вашей скорости интернета.
4
Radio operation
·
Set FUNCTION switch to RADIO position.
·
Select your desired broadcasting band by pressing BAND button.
·
Press NEXT/TUNE-UP button or NEXT/TUNE-UP button and then release the button when the fast scanning starts. The frequency will continue to
change and will automatically stop when a broadcast station is received.
·
To receive a weak broadcast signal press the NEXT/TUNE-UP or NEXT/TUNE-UP button by one press at a time and adjust the frequency you wish to
receive.
RADIO STATION MEMORY
·
12 broadcast stations: 6 FM band and 6 AM stations can be stored to the preset memory.
·
During tuner mode, find a desired station.
·
Press MEMORY button to make the channel display appear.
·
Press NEXT/TUNE-UP button or BACK/TUNE-DOWN button to choose the desired channel.
·
Press MEMORY button again, then the desired station is stored in channel. The display shows the channel of the desired station.
·
Repeat steps for storing various stations to other channels.
ANTENNA
·
For FM reception, adjust the telescopic antenna appropriately to obtain the best reception on the band selected.
·
The AM signals are picked up through the built-in ferrite antenna. The set should be placed to a position for the best reception.
FM and FM stereo reception
·
Set the BAND switch to FM position, programmer is received in mono mode.
NOTE:
In particular when stereo signal is weak and much noise are received, it is preferable to receive the programmer in mono.
·
Press STEREO ON/OF button, programmer is received in stereo mode, thus FM STEREO indicator should light up.
Cassette playback
·
Slide the FUNCTION switch to TAPE position.
·
Press the STOP/EJECT button to open the cassette compartment.
·
Insert a cassette and push the cassette door to close the cassette compartment.
·
Press the PLAY button to start the playing.
·
Adjust the level and quality of sound with VOLUME knob.
NOTE:
·
Press the PAUSE button to pause the playing.
·
Press the STOP/EJECT button to stop the playing, press the button again to open the cassette door and you can take out the tape.
