Магнитолы Elenberg MX-390DVD - инструкция пользователя по применению, эксплуатации и установке на русском языке. Мы надеемся, она поможет вам решить возникшие у вас вопросы при эксплуатации техники.
Если остались вопросы, задайте их в комментариях после инструкции.
"Загружаем инструкцию", означает, что нужно подождать пока файл загрузится и можно будет его читать онлайн. Некоторые инструкции очень большие и время их появления зависит от вашей скорости интернета.
46
If you suspect something is wrong, immediately switch power off.
Immediately stop using it and call the store where you purchased it. Never
try to repair the unit yourself because it is dangerous to do so.
Problem
Cause
Solution
No power or
no sound
Car engine switched off.
Turn on the car ignition.
Cable is not correctly con-
nected
Check connection
Fuse is burnt
Replace fuse
Check volume or mute on
If the above solutions cannot help, press the RESET button.
Disk is in-
serted but no
sound
Disc is upside down.
Place disc right way up, with the
label side up
Disc is dirty or damaged
Clean or change the CD
Disc sound
skips, tone
quality is low
Disc is dirty or damaged
Clean or change the CD
Sound skips
due to vibra-
tion
Mounting angle is over 30
0
Adjust mounting angle to less
than 30
0
Unstable mounting
Mount the unit securely with the
mounting parts
Interference
noise during
broadcast
Station is too far, or signal are
too weak
Select other station of higher
signal level.
Preset station
lost
Battery cable is not correctly
connected
Connect the battery cable to the
live terminal
Error Display
Messages
Disc is dirty, damaged or up-
side down.
Press “ ” to eject the disc. In
case that the disc cannot be
ejected, press RESET switch and
press the
“ ” again.
When video
file initializing
time is too
long
File read error or file type not
supported
Press SRC to exit. Then press
SRC to play disc again.
TROBLESHOOTING
