Магнитолы Elenberg MX-380 USB - инструкция пользователя по применению, эксплуатации и установке на русском языке. Мы надеемся, она поможет вам решить возникшие у вас вопросы при эксплуатации техники.
Если остались вопросы, задайте их в комментариях после инструкции.
"Загружаем инструкцию", означает, что нужно подождать пока файл загрузится и можно будет его читать онлайн. Некоторые инструкции очень большие и время их появления зависит от вашей скорости интернета.
0
Test transmissions are being conducted in many other European coun
-
tries. It is expected that RDs will be available in most western European
countries in the near future.
5. “AF/REG” function (ALTERNATIVE FREQuENCIEs)
When pressed short, AF/REG switching mode is selected.
When AF/REG switching mode is selected, the radio checks the signal
strength of the AF all the time.
When pressed long, it is activated as regional mode ON/OFF.
• Regional mode ON:
AF switching or PI sEEK is implemented to the station which have all
PI codes same as current station. REG segment is turned on, in LCD
display.
• Regional mode OFF
The regional code in the format of PI code is ignored when AF switch
-
ing or PI sEEK is implemented.
6. “TA” function (TRAFFIC ANNOuNCEMENT)
When pressed short, it is activated as TA mode on or off.
When TA mode is on and trafic announcement is transmitted.
• When the unit is CD/MP3 mode, it will switch to radio mode tempo
-
rarily.
• If the volume level was under the threshold point, it will be raised to
the threshold point.
• When TP station is received, TP segment is turned on in LCD display.
7. “PTY” function (PROGRAM TYPE)
PTY MusIC→PTY sPEECH→PTY OFF
While selecting PTY type, its selection is implemented by preset buttons
as described in preset key.
When PTY is selected, the radio starts to search corresponding PTY in
-
formation, and stops if the corresponding PTY information is detected.
8. Display (DIsP)
When this key is pressed, it is operated as the conversion of each display
mode as follow.
1) In case of receiving RDs station.
RADIO MODE: Ps→CT→FREQ→PTY
CD/MP3 PLAYER MODE: CDP→CT→Ps→FREQ→PTY
2) In case of receiving NON RDs station
RADIO MODE: FREQ→CLOCK→NO PTY
CD/MP3 PLAYER MODE: CDP→FREQ→CLOCK→NO PTY
Each display time is several seconds, and come back to 1’st position
after several seconds.
Notes: CT - clock time; FREQ - frequency; CDP - CD Player
9. Mode button (MD)
by pressing this key, user can select. AuX/TuNER/CD-MP3/usb or MMC/
sD mode.
