Metabo STE 100 Quick - Инструкция по эксплуатации - Страница 12

ENGLISH

en

12

and ignore tool safety principles. 

A careless 

action can cause severe injury within a fraction of a 

second.

3.4 Power tool use and care

a) 

Do not force the power tool. Use the correct 

power tool for your application.

The correct 

power tool will do the job better and safer at the rate 

for which it was designed.

b) 

Do not use the power tool if the switch does 

not turn it on and off.

Any power tool that cannot 

be controlled with the switch is dangerous and must 

be repaired.

c) 

Disconnect the plug from the power source 

and/or remove the battery pack, if detachable, 

from the power tool before making any 

adjustments, changing accessories, or storing 

power tools.

Such preventive safety measures 

reduce the risk of starting the power tool 

accidentally.

d) 

Store idle power tools out of the reach of 

children and do not allow persons unfamiliar 

with the power tool or these instructions to 

operate the power tool.

Power tools are 

dangerous in the hands of untrained users.

e) 

Maintain power tools and accessories with 

care. Check for misalignment or binding of 

moving parts, breakage of parts and any other 

condition that may affect the power tool's 

operation. If damaged, have the power tool 

repaired before use.

Many accidents are caused 

by poorly maintained power tools.

f) 

Keep cutting tools sharp and clean. 

Properly 

maintained cutting tools with sharp cutting edges 

are less likely to bind and are easier to control.

g) 

Use the power tool, accessories and tool bits 

etc. in accordance with these instructions, 

taking into account the working conditions and 

the work to be performed.

Use of the power tool 

for operations different from those intended could 

result in a hazardous situation.

h) 

Keep handles and grasping surfaces dry, 

clean and free from oil and grease.

Slippery 

handles and grasping surfaces do not allow safe 

handling and control of the tool in unexpected 

situations.

3.5 Service

a) 

Have your power tool serviced by a qualified 

repair person using only identical replacement 

parts.

This will ensure that the safety of the power 

tool is maintained.

Hold the power tool by the insulated gripping 

surfaces when performing an operation where 

the cutting accessory may contact hidden 

wiring or its own cord.

 Contact with a live lead 

may also make metal power tool parts "live" and 

lead to an electric shock.

Using clamps or other means, fasten and 

secure the workpiece to a stable base.

 If you 

hold the workpiece only with your hand or against 

your body, it will remain unstable and this could lead 

to a loss of control.
Ensure that the place where you wish to work is free 

of power cables, gas lines or water pipes (e.g. 

check using a metal detector).
Do not try to saw extremely small workpieces.
When sawing, the footplate must make secure 

contact with the workpiece.
When interrupting a cut for any reason, release the 

trigger and hold the saw motionless in the material 

until the saw blade comes to a complete stop. Never 

attempt to remove the saw from the workpiece while 

the saw blade is in motion or kickback may occur. 
Do not switch the machine on while the saw blade is 

touching the workpiece. Let the saw blade reach full 

speed before making a cut.
When restarting a saw in the workpiece, centre the 

saw blade in the kerf and check that saw teeth are 

not engaged into the material. If the saw blade 

seizes, it may kickback from the workpiece when 

the saw is restarted.
Keep hands well away from the sawing area and the 

saw blade. Do not reach underneath the workpiece.
Remove chips and similar material only with the 

machine at a standstill.
Pull the plug out of the socket before making any 

adjustments, changing tools, carrying out 

maintenance or cleaning.
Danger of injury due to the sharp jigsaw blade. After 

stopping work, the jigsaw blade may still be hot. 

Wear protective gloves.

Reducing dust exposure:

Some of the dust created using this power tool 

may contain chemicals known to cause 

cancer, allergic reaction, respiratory disease, birth 

defects or other reproductive harm. Some 

examples of these chemicals are: Lead from lead-

based paints, crystalline silica from bricks and 

cement and other masonry products, arsenic and 

chromium from chemically-treated lumber, hard 

wood like oak or beech, metals, asbestos.

The risk from exposure to such substance will 

depends on how long you or bystanders are being 

exposed.

Do not let particles enter the body.

To reduce your exposure to these substances: work 

in a well ventilated area, and work with approved 

safety equipment, such as dust masks that are 

specially designed to filter out microscopic 

particles.
Observe the relevant guidelines for your material, 

staff, application and place of application (e.g. 

occupational health and safety regulations, 

disposal).
Collect the particles generated at the source, avoid 

deposits in the surrounding area.
Use only suitable accessories. In this way, fewer 

particles enter the environment in an uncontrolled 

manner. 
Use a suitable extraction unit.

4. Special Safety Instructions