Лобзики Bosch GST 90 E - инструкция пользователя по применению, эксплуатации и установке на русском языке. Мы надеемся, она поможет вам решить возникшие у вас вопросы при эксплуатации техники.
Если остались вопросы, задайте их в комментариях после инструкции.
"Загружаем инструкцию", означает, что нужно подождать пока файл загрузится и можно будет его читать онлайн. Некоторые инструкции очень большие и время их появления зависит от вашей скорости интернета.
12
| English
1 619 P08 843 | (5.5.10)
Bosch Power Tools
f
If devices are provided for the connection
of dust extraction and collection facilities,
ensure these are connected and properly
used.
Use of dust collection can reduce dust-
related hazards.
Power tool use and care
f
Do not force the power tool. Use the correct
power tool for your application.
The correct
power tool will do the job better and safer at
the rate for which it was designed.
f
Do not use the power tool if the switch does
not turn it on and off.
Any power tool that
cannot be controlled with the switch is dan-
gerous and must be repaired.
f
Disconnect the plug from the power source
and/or the battery pack from the power
tool before making any adjustments, chang-
ing accessories, or storing power tools.
Such preventive safety measures reduce the
risk of starting the power tool accidentally.
f
Store idle power tools out of the reach of
children and do not allow persons unfamil-
iar with the power tool or these instructions
to operate the power tool.
Power tools are
dangerous in the hands of untrained users.
f
Maintain power tools. Check for misalign-
ment or binding of moving parts, breakage
of parts and any other condition that may
affect the power tool’s operation. If dam-
aged, have the power tool repaired before
use.
Many accidents are caused by poorly
maintained power tools.
f
Keep cutting tools sharp and clean.
Properly
maintained cutting tools with sharp cutting
edges are less likely to bind and are easier to
control.
f
Use the power tool, accessories and tool
bits etc. in accordance with these instruc-
tions, taking into account the working con-
ditions and the work to be performed.
Use
of the power tool for operations different
from those intended could result in a hazard-
ous situation.
Service
f
Have your power tool serviced by a quali-
fied repair person using only identical re-
placement parts.
This will ensure that the
safety of the power tool is maintained.
Safety Warnings for Jigsaws
f
Hold power tool by insulated gripping sur-
faces, when performing an operation where
the cutting accessory may contact hidden
wiring or its own cord.
Cutting accessory
contacting a “live” wire may make exposed
metal parts of the power tool “live” and
could give the operator an electric shock.
Additional Safety and Working
Instructions
f
Keep hands away from the sawing range.
Do not reach under the workpiece.
Contact
with the saw blade can lead to injuries.
f
Apply the machine to the workpiece only
when switched on.
Otherwise there is dan-
ger of kickback when the cutting tool jams in
the workpiece.
f
Pay attention that the base plate rests se-
curely on the material while sawing.
A
jammed saw blade can break or lead to kick-
back.
f
When the cut is completed, switch off the
machine and then pull the saw blade out of
the cut only after it has come to a standstill.
In this manner you can avoid kickback and
can place down the machine securely.
f
Use only sharp, flawless saw blades.
Bent or
unsharp saw blades can break or cause kick-
back.
f
Do not brake the saw blade to a stop by ap-
plying side pressure after switching off.
The
saw blade can be damaged, break or cause
kickback.
OBJ_BUCH-1231-001.book Page 12 Wednesday, May 5, 2010 11:59 AM
