Bort BPS-18Li-Q - Инструкция по эксплуатации - Страница 9

9

water gets inside a power tool, it will increase the risk of 

an electric shock .

•  Do not damage the cord . Never use the cord for carry-

ing, pulling or unplugging the power tool . Keep the cord 

away from heat, oil, sharp edges or moving parts . Dam-

aged or entangled cords increase the risk of an electric 

shock .

•  When operating a power tool outdoors, use an extension 

cable suitable for outdoor use . Using a cord suitable for 

outdoor use reduces the risk of an electric shock .

•  If operating a power tool in a damp location is unavoid-

able, use a power supply protected by a residual current 

device (RCD) . Using an RCD reduces the risk of an electric 

shock .

Personal safety

• Stay alert, watch what you are doing and use common 

sense when operating a power tool . Do not use a power 

tool when you are tired or under the influence of drugs, 

alcohol or medication . A moment of inattention when op-

erating a power tool may result in serious personal injury .

• Use safety equipment . Always wear eye protection . Using 

safety equipment such as a dust mask, non-skid safety 

shoes, a hard hat, or hearing protection whenever it is 

needed will reduce the risk of personal injury .

• Avoid accidental starts . Ensure the switch is in the off posi-

tion before inserting the plug . Carrying power tools with 

your finger on the switch or plugging in power tools when 

the switch is in the on position makes accidents more 

likely .

• Remove any adjusting keys or spanners before turning on 

the power tool . A spanner or key left attached to a rotating 

part of the power tool may result in personal injury .

• Do not reach out too far . Keep your feet firmly on the 

ground at all times . This will enable you retain control over 

the power tool in unexpected situations .

• Dress properly . Do not wear loose clothing or jewellery . 

Keep your hair, clothing and gloves away from the power 

tool . Loose clothes, jewellery or long hair can become en-

tangled in the moving parts .

• If there are devices for connecting dust extraction and col-

lection facilities, please ensure that they are attached and 

used correctly . Using such devices can reduce dust-related 

hazards .

Power tool use and care

•  Do not expect the power tool to do more than it can . Use 

the correct power tool for what you want to do . A power 

tool will achieve better results and be safer if used in the 

context for which it was designed .

•  Do not use the power tool if the switch cannot turn it on 

and off . A power tool with a broken switch is dangerous 

and must be repaired .

•  Disconnect the plug from the power source before mak-

ing adjustments, changing accessories, or storing power 

tools . Such preventive safety measures reduce the risk of 

starting the power tool accidentally .

•  Store power tools, when not in use, out of the reach of 

children and do not allow people who are not familiar 

with the power tool or these instructions to operate it . 

Power tools are potentially dangerous in the hands of 

untrained users .

•  Maintain power tools . Check for misalignment or jammed 

moving parts, breakages or any other feature that might 

affect the operation of the power tool . If it is damaged, 

the power tool must be repaired . Many accidents are 

caused by using poorly maintained power tools .

•  Keep cutting tools sharp and clean . Properly maintained 

cutting tools with sharp cutting edges are less likely to 

jam and are easier to control .

•  Use the power tool, accessories and cutting tools, etc ., 

in accordance with these instructions and in the man-

ner intended for the particular type of power tool, taking 

into account the working conditions and the work which 

needs to be done . Using a power tool in ways for which it 

was not intended can lead to potentially hazardous situ-

ations .

Power tool use and care

•  Do not force the power tool . Use the correct power 

tool for your application . The correct power tool will 

do the job better and safer at the rate for which it was 

designed .

•  Do not use the power tool if the switch does not turn 

it on and off . Any power tool that cannot be controlled 

with the switch is dangerous and must be repaired .

•  Disconnect the plug from the power source and/or the 

battery pack from the power tool before making any 

adjustments, changing accessories, or storing power 

tools . Such preventive safety measures reduce the risk of 

starting the power tool accidentally .

•  Store idle power tools out of the reach of children and 

do not allow persons unfamiliar with the power tool 

or these instructions to operate the power tool . Power 

tools are dangerous in the hands of untrained users .

•  Maintain power tools . Check for misalignment or bind-

ing of moving parts, breakage of parts and any other 

condition that may affect the power tool’s operation . 

If damaged, have the power tool repaired before use . 

Many accidents are caused by poorly maintained power 

tools .

•  Keep cutting tools sharp and clean . Properly maintained 

cutting tools with sharp cutting edges are less likely to 

bind and are easier to control .

•  Use the power tool, accessories and tool bits etc . in 

accordance with these instructions, taking into account 

the working conditions and the work to be performed . 

Use of the power tool for operations different from 

those intended could result in a hazardous situation .

Battery tool use and care

•  Recharge only with the charger specified by the manu-

facturer . A charger that is suitable for one type of battery 

pack may create a risk of fire when used with another 

battery pack .

•  Use power tools only with specifically designated bat-

tery packs . Use of any other battery packs may create a 

risk of injury and fire .

•  When battery pack is not in use, keep it away from other 

metal objects, like paper clips, coins, keys, nails, screws 

or other small metal objects, that can make a connec-

tion from one terminal to another . Shorting the battery 

terminals together may cause burns or a fire .

•  Under abusive conditions, liquid may be ejected from 

the battery; avoid contact . If contact accidentally occurs,