Bort BPS-18Li-Q - Инструкция по эксплуатации - Страница 10

10

flush with water . If liquid contacts eyes, additionally seek 

medical help . Liquid ejected from the battery may cause 

irritation or burns .

Service

Your power tool should be serviced by a qualified special-

ist using only standard spare parts . This will ensure that it 

meets the required safety standards .

SAFETY WARNINGS FOR JIGSAWS

  Important! Use of any accessories or attachments 

other than those supplied or recommended in these 

operating instructions can mean the risk of injury .

•  When using jig saws ear protectors and a face mask 

should be worn . Exposure to noise can cause damage to 

hearing .

•  Do not use the jig saw to cut asbestos or materials con-

taining asbestos .

•  Do not leave power tools running unattended . Always 

switch off and do not put down or leave until it has 

stopped completely .

•  Long hair must be covered . Do not work in loose fitting 

clothing .

•  Be careful when working on walls . Damage to power sup-

ply lines, gas or water pipes can lead to dangerous situ-

ations . Use appropriate detectors to establish whether 

there are concealed wires or pipes in the working area .

•  Secure the work piece . The work piece is only secure if it 

is held by work-holding devices or in a vice .

•  Caution: saw blades can get very hot .

•  Saw blades must be kept sharp and in good condition . 

Replace partially fractured and broken saw blades im-

mediately .

•  Work calmly and evenly with the jig saw . You will thus 

avoid accidents and the saw blades and the jig saw will 

last longer .

•  Do not use for cutting pipes or cables .

•  Do not use cracked, blunt or damaged blades .

•  Do not start the saw if no blade is fitted .

•  Check there are no obstructions in/on the surface under 

the item to be cut .

•  Do not attempt to cut items thicker than the maximum 

cutting depth of the blade, or where there is insufficient 

space for the blade under the item .

•  The saw’s metal parts may become conductive if the saw 

comes into contact with a live wire . Therefore only hold 

the saw by its insulated handle .

•  Check that the ventilation slots are not blocked .

•  Never remove dust, obstructions or the like from the 

work area while the blade is operating .

•  Never stop the saw blade by applying pressure to the saw 

or to the side of the blade .

•  Do not lift the saw from the item being cut if the blade 

is still running .

•  Never place the saw on a table or workbench if it has not 

stopped completely .

•  The saw blade will continue to run a short time after the 

machine has been switched off .

•  Hold power tool by insulated gripping surfaces, when 

performing an operation where the cutting accessory 

may contact hidden wiring or its own cord . Cutting ac-

cessory contacting a “live” wire may make exposed metal 

parts of the power tool “live” and could give the operator 

an electric shock .

SAFETY WARNINGS FO BATTERY TOOL

•  Use auxiliary handle(s), if supplied with the tool . Loss of 

control can cause personal injury .

•  Hold power tool by insulated gripping surfaces, when 

performing an operation where the cutting accessory 

may contact hidden wiring or its own cord . Cutting 

accessory contacting a “live” wire may make exposed 

metal parts of the power tool “live” and could give the 

operator an electric shock .

•  Use suitable detectors to determine if utility lines are 

hidden in the work area or call the local utility company 

for assistance . Contact with electric lines can lead to 

fire and electric shock . Damaging a gas line can lead 

to explosion . Penetrating a water line causes property 

damage or may cause an electric shock .

•  Switch off the power tool immediately when the tool 

insert jams . Be prepared for high reaction torque that 

can cause kickback . The tool insert jams when: 

– the power tool is subject to overload 

– it becomes wedged in the workpiece .

•  Hold the machine with a firm grip . High reaction torque 

can briefly occur while driving in and loosening screws .

•  When working with the machine, always hold it firmly 

with both hands and provide for a secure stance . The 

power tool is guided more secure with both hands .

•  Secure the workpiece . A workpiece clamped with 

clamping devices or in a vice is held more secure than 

by hand .

•  Do not open the battery . Danger of short-circuiting .

•  Protect the battery against heat, e . g ., against continu-

ous intense sunlight, fire, water, and moisture . Danger 

of explosion .

•  In case of damage and improper use of the battery, 

vapours may be emitted . Ventilate the area and seek 

medical help in case of complaints . The vapours can 

irritate the respiratory system .

•  Use the battery only in conjunction with your power 

tool . This measure alone protects the battery against 

dangerous overload .

•  The battery can be damaged by pointed objects such as 

nails or screwdrivers or by force applied externally . An 

internal short circuit can occur and the battery can burn, 

smoke, explode or overheat .

ADDITIONAL SAFETY INSTRUCTIONS FOR 

LASERS

Warning! The laser beam potentially causes eye 
damage . Do not look or stare into the laser beam .

•  During use, do not point the laser beam at people, di-

rectly or indirectly through reflecting surfaces .

•  This laser complies with class 2 according to the relevant 

standard . The unit includes no servicing components . Do 

not open the housing for any reason . If the unit is dam-

aged, have the damage repaired by an authorized repair 

agent .

•  Laser viewing glasses are not protective glasses against 

laser radiation .