Bort BPS-18Li-Q - Инструкция по эксплуатации - Страница 11

11

ADDITIONAL SAFETY INSTRUCTIONS FOR BAT-

TERIES AND CHARGERS

 Batteries

•  Never attempt to open for any reason .

•  Do not store in locations where the temperature may 

exceed 40 °C .

•  Charge only at ambient temperatures between 4 °C and 

40 °C .

•  Store your batteries in a cool dry place (5 °C-20 °C) . Never 

store batteries in discharged state .

•  It is better for Li-ion batteries to discharge and reload 

them regularly (at least 4 times a year) . The ideal charge 

for long-term storage of your Li-ion battery is 40% of ca-

pacity .

•  When disposing of batteries, follow the instructions giv-

en in the section “Protecting the environment” .

•  Do not cause short circuits . If connection is made be-

tween the positive (+) and negative (-) terminal directly 

or via accidental contact with metallic objects, the bat-

tery is short circuited and an intense current will flow 

causing heat generation which may lead to casing rup-

ture or fire .

•  Do not heat . If batteries are heated to above 100 °C, seal-

ing and insulating separators and other polymer compo-

nents may be damaged resulting in electrolyte leakage 

and/or internal short circuiting leading to heat genera-

tion causing rupture or file . Moreover do not dispose of 

the batteries in fire, explosion and/or intense burning 

may result .

•  Under extreme conditions, battery leakage may occur . 

When you notice liquid on the battery, proceed as fol-

lows:

 — Carefully wipe the liquid off using a cloth . Avoid skin 

contact .

 — In case of skin or eye contact, follow the instructions 

below:
•  Immediately rinse with water . Neutralize with a mild acid 

such as lemon juice or vinegar .

•  In case of eye contact, rinse abundantly with clean water 

for at least 10 minutes . Consult a physician .

Fire hazard! Avoid short-circuiting the contacts of a 

detached battery . Do not incinerate the battery .

Chargers

•  Never attempt to charge non-rechargeable batteries .

•  Have defective cords replaced immediately .

•  Do not expose to water .

•  Do not open the charger .

•  Do not probe the charger .

•  The charger is intended for indoor use only .

WARRANTY

This product is warranted for a 36-month period ef-

fective from the date of purchase by the first user .

•  This warranty covers all material or production flaws ex-

cluding : batteries, chargers, defective parts subject to 

normal wear & tear such as bearings, brushes, cables, and 

plugs, or accessories such as drills, drill bits, saw blades, 

etc . ; damage or defects resulting from maltreatment, ac-

cidents or alterations; nor the cost of transportation .

•  Damage and/or defects resulting from inappropriate use 

also do not fall under the warranty provisions .

•  We also disclaim all liability for any bodily injury resulting 

from inappropriate use of the tool .

•  Repairs may only be carried out by an authorised cus-

tomer service centre for DEKO tools . 

•  Any transportation costs shall always be borne by the 

customer, unless agreed otherwise in writing .

•  At the same time, no claim can be made on the warranty 

if the damage of the device is the result of negligent 

maintenance or overload .

•  Definitely excluded from the warranty is damage result-

ing from fluid permeation, excessive dust penetration, 

intentional damage (on purpose or by gross careless-

ness), inappropriate usage (use for purposes for which 

the device is not suitable), incompetent usage (e .g . not 

following the instructions given in the manual), inexpert 

assembly, lightning strike, erroneus net voltage . This list 

is not exhaustive .

•  Acceptance of claims under warranty can never lead to 

the prolongation of the warranty period nor commence-

ment of a new warranty period in case of a device re-

placement .

•  Devices or parts which are replaced under the warranty 

therefore remain the property of Varo NV .

•  We reserve the right to reject a claim whenever the pur-

chase cannot be verified or when it is clear that the prod-

uct has not been properly maintained . (Clean ventilation 

slots, carbon brushes serviced regularly, etc .) .

•  Your purchase receipt must be kept as proof of date of 

purchase .

•  Your appliance must be returned undismantled to your 

dealer in an acceptably clean state, (in its original blow-

moulded case if applicable to the unit), accompanied by 

proof of purchase .

Your tool must be charged at least 1x per month to ensure 

optimal operation of this tool .

ENVIRONMENT

Should your appliance need replacement after ex-

tended use, do not dispose of it with the house-

hold refuse, but in an environmentally safe way .

Waste produced by electrical machine items 

should not be handled like normal household rubbish . 

Please recycle where recycle facilities exist . Check with your 

Local Authority or retailer for recycling advice . 

Noise/Vibration Information

Measured in accordance with EN 60745-2-11 the sound 

pressure level of this tool is 73 dB(A) and the sound power 

level is 84 dB(A) (standard deviation: 3 dB), and the vibra-

tion is 7,01 m/s

2

 (hand-arm method) .

Declaration of Conformity  

We declare under our sole responsibility that this product 

is in conformity with the following standards or standard-

ized documents: EN 60745-1, EN 60745-2-11, EN 55014-1, 

EN 55014-2, EN 61000-3-2, EN 61000-3-3, in accordance 

with the regulations 2006/42/EC, 2006/95/EC, 2004/108/

EC, 2011/65/EU .