LG HBS-FN7 - Инструкция по эксплуатации

10

15

12

17

11

16

13

18

19

14

Disposal of waste batteries/accumulators

1 T

his symbol may be combined with chemical symbols for mercury (Hg), cadmi-

um (Cd) or lead (Pb) if the battery contains more than 0.0005% of mercury,

0.002% of cadmium or 0.004% of lead.

2 All batteries/accumulators should be disposed separately from the municipal

waste stream via designated collection facilities appointed by the government

or the local authorities.

3 The correct disposal of your old batteries/accumulators will help to prevent

potential negative consequences for the environment, animal and human

health.

4 For more detailed information about disposal of your old batteries/accumulators,

please contact your local council, waste disposal service or the shop where you

purchased the product.

Important Safety Information

Avoiding hearing damage

Permanent hearing loss may occur if you use your headset at a high volume. Set the volume

to a safe level. You can adapt over time to a higher volume of sound that may sound normal

but can be damaging to your hearing.

If you experience ringing in your ears or muffled speech, stop listening and have your

hearing checked. The louder the volume, the less time is required before your hearing could

be affected. Hearing experts suggest that to protect your hearing:

• Limit the amount of time you use Headset at high volume.
• Avoid turning up the volume to block out noisy surroundings.
• Turn the volume down if you can’t hear people speaking near you.

Please refer to your handset user guide for more information on how to adjust listening

levels on your handset.

Your

Bluetooth

headset is designed to operate in compliance with the RF exposure

guidelines and limits set by national authorities and international health agencies when

used with any compatible LG Electronics mobile phone.

2.

Bluetooth Connection Precautions

The following environments affect the range and reception of

Bluetooth

signals:

- When walls, metal, human bodies, or other obstacles exist between the

Bluetooth

device

and the connected device.

- When equipment that uses 2.4 GHz frequency signals (Wireless LANs, wireless phones,

microwave ovens, etc.) is placed near the devices being used.

-When using a

Bluetooth

device (TV, laptop, etc.) other than the mobile phone, the sound

quality may be affected by the specifications and performance of the device.

3. Potentially explosive atmosphere

Turn off your electronic device when in any area with a potentially explosive atmosphere.

It is rare, but your electronic device could generate sparks. Sparks in such areas could

cause an explosion or fire resulting in bodily injury or even death. Areas with a potentially

explosive atmosphere are often, but not always, clearly marked.

4. Battery information

A rechargeable battery has a long service life if treated properly. A new battery or one that

has not been used for a long period of time could have reduced capacity the first few

times it is used. Do not expose the battery to extreme temperatures, never above +50°C

(+122°F) or below -10°C (+14°F). For maximum battery capacity, use the battery in

room temperature. If the battery is used in low temperatures, the battery capacity will

be reduced. The battery can only be charged in temperatures between 0°C (+32°F) and

+45°C (+113°F).

5. Recycling the battery in your

Bluetooth Headset

The battery in your

Bluetooth

Headset must be disposed of properly and should never be

placed in municipal waste.

IMPORTANT NOTE:

To comply with the FCC RF exposure compliance requirements, no change to the antenna or

the device is permitted. Any change to the antenna or the device could result in the device

exceeding the RF exposure requirements and void user’s authority to operate the device.

DECLARATION OF CONFORMITY:

Hereby, LG Electronics declares that the radio equipment type this headset is in compliance

with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at

http://www.lg.com/global/declaration

Bluetooth

® is a registered trademark of Bluetooth SIG, Inc. worldwide.

Android, Google Play, the Google Play logo, and other related marks and logos are

trademarks of Google LLC.
Apple iOS and App Store is a trademark of Apple Inc.

FCC ID: ZNFHBSFN7

Additional Information

1. Radio frequency exposure

This

Bluetooth

LG Stereo Headset is a radio transmitter and receiver. When in operation,

it communicates with a

Bluetooth

equipped mobile device by receiving and transmitting

radio frequency (RF) electromagnetic fields (microwaves) in the frequency range 2402

to 2480 MHz.

Declaration of Confirmation

FCC NOTICE TO USERS:

This device complies with part 15 of the FCC rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and

(2) This device must accept any interference received, including interference that may

cause undesired operation.

Changes or modifications not expressly approved by the manufacturer (or party responsible)

for compliance could void the user’s authority to operate the equipment.

FCC Part 15.105 statement

This equipment has been tested and found to comply with the limits for a Class B digital

device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in

a residential installation. This equipment generates, uses and can radiate radio frequency

energy and, if not installed and used in accordance with the instructions, may cause harmful

interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation.

If this equipment does cause harmful interference to radio or television reception, which can

be determined by turning the equipment off and on, the user is encouraged to try to correct

the interference by one or more of the following measures:

- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the

receiver is connected.

- Consult the dealer or an experienced radio/TV technician for help.

Specifications and Features

Item

Comments

Bluetooth

Specifications

V 5.0 (Headset/Hands-Free/A2DP/AVRCP)

Battery

Earbud : 3.7 V / 55 mAh, Lithium-ion
Charging case : 3.7 V / 390 mAh, Lithium-ion

Music Play Time Earbuds

& With Charging case

(ANC ON)

Up to 7 & Up to 21 hours (Up to 5 / Up to 15 hours)*

Charging Time

Earbud : within an hour / Charging case : within 2 hours
Fast Charging : 5 min charge for up to 60 min playtime

※

When charging wired at room temperature

Rated Input Voltage

Earbud : DC 5 V, 110 mA
Charging case : DC 5 V, 500 mA

Operating Temperature

0 °C (+32 °F) ~ +40 °C (+104 °F)

Dimensions (mm) /

Weight (g)

Earbud : 16.2 mm (W) X 32.7 mm (L) X 26.8 mm (H) /

5.6 g (One earbud)
Charging case : 54.5 mm (W) X 54.5 mm (L) X 27.6 mm (H) /

39 g

Frequency range

2402 MHz to 2480 MHz

Output power (Max.)

10 dBm

*Duration of use may vary depending on the connected mobile device, features being used,

settings, signal strength, operating temperature, frequency band, and other methods of use.

Fast charging feature does not apply when charging case is placed on wireless charging

device such as a pad.

Wireless charging feature charges at a slower rate due to less power being transmitted

to the charging case.

UVnano

UVnano LED function only operates when the charging case is

closed and connected to a power source using charging cable.

UVnano LED does not operate while device is charging wirelessly

such as on a pad or third party wireless charging device.

- Independent testing shows the UVnano charging case

kills 99.9% of the tested bacteria* on the speaker mesh

of the earbuds after 10 minutes while charging.

*Testing conducted by independent test using preproduction ear buds charged for 1 hour prior.

Ear buds were floated and diluted in pre-cultured Escherichia coli and Staphylococcus

aureus for 5 minutes, and dried to room temp for 30 mins. UV irradiation was carried out

over 5, 10, 15 and 20 mins, with both bacteria not detected after 10 mins.

- For best result, it is recommended that the full 10 minutes of UVnano LED operation be

performed while charging.

NOTE:

The UVnano indicator turns on blue while the UVnano LED is on.

The light will slowly illuminate on and off until the UVnano LED function is complete

(10 minutes). Once completed, the indicator light will switch back to the always-on

battery indicator, see “Battery Status”. Performance may vary based on usage

conditions.

A white product may slightly differ in the color of the UVnano LED contact area, but

there is no problem with the product performance.

!

CAUTION:

Be aware that the temperature of the earbuds may rise while the UVnano

LED is operating. Avoid direct eye and skin exposure to UV light.

Keep out of reach of children.

Charging

Wired Charging

When the charging cable is

connected, the charging status is

displayed in the charging case.

NOTE:

The earbuds and the charging

case are charged at the same time.

The charging port on the charging

case cannot be used to supply power

to mobile phones, etc.

Wireless Charging

Align the bottom center of the charging case

with the center of the wireless charger.

NOTE:

The wireless charger is not provided.

The wireless charging function may not

work in some wireless chargers. Wireless

charging feature charges at a slower rate

due to less power being transmitted to

the charging case.

Checking the Battery Status

If earbuds are mounted in the charging case, the earbuds’ battery status is displayed.

Otherwise, the charging case’s battery status is displayed.

If the earbuds are mounted in the charging case while plugged in, the UVnano process will

commence for ten minutes.

Once this process is complete, the charging case’s battery status will be displayed.

Battery

Status

Indicator

Remaining Battery

(charger not

connected)

Charging

State (charger

connected)

Red

20% or lower

Charging

Yellow

20% - 80%

-

Green

80% or higher

Fully charged

NOTE:

When the charging case lid is closed, charging case

battery status is displayed. If the charging case has no

remaining charge, there will be no display and it cannot

function. We recommend you keep the charging case

charged at all times as the earbuds are not able to be

turned on and turned off independently.

Battery Status Indicator

Status

Description

Bluetooth

Search Mode

The

battery status indicator

flashes in blue.

Battery below 20%

The

battery status indicator turns on and off in red.

Battery 20% - 80%

The

battery status indicator turns on and off in yellow.

Battery 80% or more

The

battery status indicator turns on and off in green.

When there is a problem

while charging

The

battery status indicator

flashes in red.

Charging

(charger connected)

The

battery status indicator turns on in red.

Charging complete

(charger connected)

The

battery status indicator turns on in green.

Out of Range

If the device connected to the product is out of effective communication range, the

communication signal becomes weak and the communication is lost. The effective

communication range may vary depending on surrounding and other conditions.
If the device comes back within effective communication range, the product automatically

reconnects to the device. If the device is not automatically reconnected,

touch the left or

right earbud once to connect them.

LG TONE Free App

If you install the “LG TONE Free” app, you can use Check Earbud Battery, Voice Alert,

Change Equalizer Mode, Check Last Connected Location Information, and Find My Earbuds

functions. Check out the app for more details.

To install the “LG TONE Free” app, search LG TONE Free in the Google Play Store or

App Store or scan the QR code below.
It supports Android 5.0 or higher and iOS 11 or higher.

Google Play

App Store

Troubleshooting

If you see any of the following symptoms while using the product, make sure to recheck it.

It may not be a malfunction.

Symptom

Cause and Solution

The power does not

turn on

Check the battery level and charge it.

If unable to make a call

with earbuds

If the mobile phone does not support headset and hands-

free functions, you cannot use the calling features.

Check the battery level and charge it.

If unable to register

earbuds to mobile

phone

Check whether earbuds are turned on.

Check if the charging case of earbuds are in search mode.

- Press the pairing button on the charging case to switch

to search mode.

If you replaced the

earbuds or there is

a problem with the

operation

Put the earbuds in the charging case and, with the case open,

press the pairing button for 10 seconds or more.

- The factory reset proceeds while the battery status

indicator on the charging case flashes red.

Please reconnect the device after factory reset.

Using headsets safely

Use of Headset to listen to music while operating a vehicle is not recommended and is illegal

in some states and countries. Be careful and attentive while driving. Stop using this device

if you find it disruptive or distracting and do not use this device while operating any type of

vehicle or performing any other activity that requires your full attention.

Open Source Software Notice Information

To obtain the source code under GPL, LGPL, MPL, and other open source licenses, that is

contained in this product, please visit http://opensource.lge.com.
In addition to the source code, all referred license terms, warranty disclaimers and copyright

notices are available for download.
LG Electronics will also provide open source code to you on CD-ROM for a charge covering

the cost of performing such distribution (such as the cost of media, shipping, and handling)

upon email request to opensource@lge.com.
This offer is valid for a period of three years after our last shipment of this product.

This offer is valid to anyone in receipt of this information.

RISK GROUP 2

CAUTION :

UV EMITTED FROM THIS PRODUCT.

EYE OR SKIN IRRITATION MAY RESULT FROM EXPOSURE.

USE APPROPRIATE SHIELDING.

WARNING :

WHEN OPENING THE CHARGING CASE OR WIRELESS

CHARGING, THE UV FUNCTION DOES NOT WORK.