REXEL (2104152) - Инструкция по эксплуатации - Страница 4

4

1

Power switch

2

Temperature switch

3

Power LED

4

Ready LED

5

Top housing

6

Bottom housing

7

Rail

8

Rail clip

9

Ruler

10 Cutting strip

11 Trimmer Housing
12 Jam Release Lever
13 Corner Cutter body
14 Corner Cutter lever
15 Corner Cutter base
16 Corner Cutter blade
17 Corner Cutter anvil
18 Trimmer blade selector
19 Trimmer Blade button

Subject to technical changes without prior notice.

specifications

Electrical

220-240VAC / 50Hz, 1.6A, 365W

Machine Dimensions

W420 x D145 x H95mm

Machine Weight

1.95kg

Maximum Sign Cover Width

A3: 330mm

Maximum Sign Cover Weight

125 micron

Warm Up Time

4-6 Minutes

ser vice

Do not attempt to service or repair this product yourself.  If the 

unit becomes jammed or inoperable, immediately unplug and and 

dispose of properly.

location of controls

safety instructions

YOUR SAFETY AS WELL AS THE SAFETY OF OTHERS IS 

IMPORTANT TO ACCO

®

 BRANDS. IN THIS INSTRUCTION 

MANUAL AND ON PRODUCT ARE  IMPORTANT SAFETY 

MESSAGES. READ THESE MESSAGES CAREFULLY.

This safety message means that you could be seriously hurt or 

killed if you open the product and expose your self to hazardous 

voltage.

THE SAFETY ALERT SYMBOL PRECEDS EACH 

SAFETY MESSAGE IN THIS INSTRUCTION 

MANUAL. THIS SYMBOL INDICATES A POTENTIAL 

PERSONAL SAFETY HAZARD THAT COULD HURT 

YOU OR OTHERS, AS WELL AS CAUSE PRODUCT 

DAMAGE OR PROPERTY DAMAGE. 

m

THE FOLLOWING WARNING IS FOUND ON THE PRODUCT IN 

SEVERAL LANGUAGES.

Electrical shock hazard. 

Do not open. No user 

servicable parts inside. 

Refer servicing to qualified 

service personnel.

WARNING

m

c

important safeguards

WARNING: 

FOR YOUR PROTECTION, DO NOT 

CONNECT THE SIGNMAKER TO ELECTRICAL 

POWER UNTIL YOU READ THESE INSTRUCTIONS 

COMPLETELY. KEEP THESE INSTRUCTIONS IN A 

CONVENIENT LOCATION FOR FUTURE REFERENCE. 

TO GUARD AGAINST INJURY, THE FOLLOWING 

BASIC SAFETY PRECAUTIONS MUST BE OBSERVED 

IN THE SET UP AND USE OF THIS PRODUCT.

m

WARNING: 

TO AVOID ELECTRICAL SHOCK 

OR OTHER INJURY, THE FOLLOWING SAFETY 

PRECAUTIONS MUST BE OBSERVED.

m

CAUTION: 

SHARP BLADE, DO NOT TOUCH THE EDGE 

OF THE BLADE.

m

cleaning

WARNING: 

UNPLUG THIS MACHINE BEFORE 

CLEANING THE EXTERIOR.
Wipe exterior only with a damp cloth and do not use 

detergents or solvents.

m

electrical safeguards

•  The unit must be connected to a supply voltage corresponding 

to the electrical rating shown on the machine.

•  The socket outlet shall be installed near the equipment and shall 

be easily accessible.

•  Unplug the unit before moving it, or when it is not in use for an 

extended period of time.

•  Do not operate with a damaged supply cord or plug. Do not 

alter the attachment plug. The plug is configured for the 

appropriate electrical supply

•  Do not overload electrical outlets beyond their capability. Fire or 

an electric shock could result.

•  The unit is intended for indoor use only.
•  Never push objects through the air vents. Do not spill any liquid 

of any kind on this product.

•  This appliance is not intended for use by children. Take care 

when operating near children.

general safeguards

•  Use this unit for its intended purpose only.
•  Do not place anything in the throat opening of the machine 

other than Sign Covers/documents.

•  Do not block the vent slots, this will cause the machine to 

overheat.

•  Place unit on a secure and stable work area to prevent the unit 

falling and possibly causing personal injury and damage to 

the unit.

•  Follow all warnings and instructions.

introduction

Thank you for purchasing the Rexel SignMaker. The SignMaker heats up to operating temperature and retains its heat so you can heat-

seal documents without waiting. The machine provides a visual indication when it is ready to use. Turn off the power and unplug the unit 

when not in use.
For best heat-sealing results, please use Rexel Sign Covers.
Please take a little time to study these instructions to ensure you get the best results from your machine. Your new SignMaker may emit a 

slight odour during its initial operation. It is normal and will diminish over time.
Download instant and customisable signs from: www.rexeleurope.com/signmaker