Einhell GE-CR 30 - Инструкция по эксплуатации - Страница 22

GB

- 22 -

7.  Cleaning, maintenance and 

ordering of spare parts

Hazard!

Always pull out the safety plug before making ad-

justments or carrying out maintenance, cleaning 

and repair work on the equipment. Make sure that 

the blade shaft is not turning.

7.1 Cleaning

• 

 Keep all safety devices, air vents and the 

motor housing free of dirt and dust as far as 

possible. Wipe the equipment with a clean 

cloth or blow it with compressed air at low 

pressure.

• 

 We recommend that you clean the device  

immediately each time you have finished 

using it.

• 

 Clean the equipment regularly with a moist 

cloth and some soft soap. Do not use 

cleaning agents  or solvents; these could at-

tack the plastic parts of the equipment. Ensu-

re that no water can seep into the device. The 

ingress of water into an electric tool increases 

the risk of an electric shock.

7.2 Replace the hoe blades

For safety reasons, we recommend having the 

hoe blades replaced by an authorized professio-

nal (see address on warranty certi

fi

 cate). 

Wear working gloves. Use only genuine spare 

parts since otherwise the function and safety of 

the machine cannot be guaranteed. 

7.3 Maintenance

 Ensure that all mounting components (i.e. screws, 

bolts, nuts etc.) are always tightened so that the 

machine can be safely operated at all times. 

Store the device in a dry room. All the metal parts 

should be cleaned and then oil to ensure that 

they provide a long life. For best results, clean the 

plastic parts of the machine with a brush or rag. 

Do not use any solvents to remove dirt. 

For space saving storage undo the star nuts (Fig. 

3e 3f /Item 8) and fold together the push bars as 

shown in Fig. 8. Ensure that you do not damage 

the cable. At the end of the season, perform a 

general inspection of the machine and remove 

any deposits which may have accumulated. At the 

start of each season, ensure that you check the 

condition of the machine. If repairs are necessary, 

please contact one of our customer service cen-

ters (see address on warranty certi

fi

 cate). 

7.4 Ordering replacement parts:

Please quote the following data when ordering 

replacement parts:

• 

 Type of machine

• 

 Article number of the machine

• 

 Identification number of the machine

• 

 Replacement part number of the part required

For our latest prices and information please go to 

www.isc-gmbh.info

8.  Disposal and recycling

The equipment is supplied in packaging to pre-

vent it from being damaged in transit. The raw 

materials in this packaging can be reused or 

recycled. The equipment and its accessories are 

made of various types of material, such as metal 

and plastic. Never place defective equipment in 

your household refuse. The equipment should 

be taken to a suitable collection center for proper 

disposal. If you do not know the whereabouts of 

such a collection point, you should ask in your 

local council o

ffi

  ces. 

9. Storage

Store the equipment and accessories in a dark 

and dry place at above freezing temperature. The 

ideal storage temperature is between 5 and 30 

°C. Store the electric tool in its original packaging.

Anl_GE_CR_30_Li_SPK7.indb   22

Anl_GE_CR_30_Li_SPK7.indb   22

17.02.2017   09:45:52

17.02.2017   09:45:52