Кондиционеры Elenberg PRT-9040 - инструкция пользователя по применению, эксплуатации и установке на русском языке. Мы надеемся, она поможет вам решить возникшие у вас вопросы при эксплуатации техники.
Если остались вопросы, задайте их в комментариях после инструкции.
"Загружаем инструкцию", означает, что нужно подождать пока файл загрузится и можно будет его читать онлайн. Некоторые инструкции очень большие и время их появления зависит от вашей скорости интернета.
• Under this mode, you cannot select a fan speed, the fan motor operates
at High speed only. The temperature setting will not function also, although
the temperature display will go up or down while pressing the “▲” or “▼”
buttons.
• Keep windows and doors closed for the best dehumidifying effect.
• Do not put the duct to window.
CAuTION:
During Cooling and dehumidifying modes, if the compressor cycle is in
-
terrupted (unplugged, power failure, etc.) and reinstated immediately
thereafter, a compressor protection circuit is automatically activated. The
compressor cannot operate during a compressor protection status. It may
take about 3 minutes before the protection circuit self-deactivates. (This is
normal)
3. FAN OPERATION
• Press the “MODE” button to select the Fan mode, he “FAN “ indicator light
will be turned on.
• Press the “FAN SPEED” button to choose the fan speed. The temperature
cannot be adjusted.
• Do not put the duct to window.
4. TImER OPERATION
setting the on timer:
• Press the “TIMER ON” button when the air conditioner is off. The “TIMER ON
“ indicator light will be turned on.
• Continue pressing or keep pressing the “TIMER ON “ button to select the
time you need the unit start to operate.
• The starting time is adjustable from 0 to 24 hours.
For the irst 10 hours, the timer can be adjusted at half an hour interval. For
the 11th hour to the 24th hour, the timer can be adjusted per hour interval.
To cancel the timer setting, adjust the set time to “0.0”.
setting the off timer:
• Press the “TIMER OFF” button when the air conditioner is on. Continue press
-
ing or keep pressing the button to select the time you need the unit to be
turned off. The Operation Panel Window will display the set time for timer
off.
• The turning off time is adjustable from 0 to 24 hours.
For the irst 10 hours, the timer can be adjusted at half an hour interval. For
the 11th hour to the 24th hour, the timer can be adjusted per hour interval.
To cancel the timer setting, adjust the set time to “0.0”.
5. WATER DRAINAgE
To meet different requirement of drainage, there are two kinds of methods for
your choice to treat the condensed water. You can choose water tank drain
-
age or continuous drainage.
Water tank drainage
A) During Cooling Mode:
• When the water level inside the internal tank reaches a predetermined
level, the unit will stop all operations automatically and the digital dis
-
play area shows “PI”.
• Carefully remove the water tank from the cabinet and dispose of the
water. Replace the water tank back to its original position. Then the air
conditioner will resume operation.
