ProfiCook PC-ES 1209 - Инструкция по эксплуатации - Страница 61

PC-ES1209_IM_new 

17.08.20

61

Cleaning

  WARNING: 

• 

Before cleaning, always remove the mains plug and wait until 

the appliance has cooled down.

•  Do not immerse the appliance in water. Otherwise this might 

result in an electric shock or fire.

• 

The steam nozzle is hot immediately after use!

  CAUTION:

• 

Do not use a wire brush or any abrasive items.

• 

Do not use any acidic or abrasive detergents.

Clean the casing with a slightly damp cloth without deter-

gents.

Group Head and Rubber Seal

Wipe group head and rubber seal with a damp cloth. Use 

a soft nylon brush to remove stubborn residues. Dry with a 

soft cloth.

Accessories

You can clean the filter holder, filter inserts, the drip tray 

grid, drip tray, the measuring spoon, the water tank, and 

the steam nozzle in a warm rinsing bath. Use a soft nylon 

brush, if necessary. Rinse with clean water. Dry all parts 

with a soft cloth.

  CAUTION:

These parts are not dishwasher-safe. Heat and aggres

-

sive detergents can cause distortion and discolouration.

Water Tank

1. 

Pull the tank with both hands up and out. Replace the 

tank after cleaning and drying. 

  NOTE:

The water tank has two hooks.

2. 

Hook the water tank into the two eyelets of the appliance.

3. 

Press the water tank slightly down for the valve to open.

Steam Nozzle

Clean the steam pipe and the attached steam nozzle 

immediately after preparing milk foam. Dry milk residue is 

difficult to clean.

1. 

Pull off the steam nozzle. Leave it for some time in the 

warm rinsing bath. In this way milk residue is easily 

removed.

2.  Wipe the steam nozzle on the appliance with a damp 

cloth.

  NOTE:

Fill a bowl with hot water to remove dry residue. Set 

it so under the steam tube that it is immersed in the 

rinsing bath.

3. 

After cleaning, slide the steam nozzle back onto the 

steam pipe. Place a heat-resistant empty bowl under the 

steam nozzle.  

Operate the appliance as instructed under “Making Cap-

puccino” points 4 and 5. After cleaning the steam nozzle 

is again ready to use.

Decalcification

Scale deposits put the functionality of your appliance at 

risk. It is necessary to decalcify the appliance regularly. The 

intervals depend on use frequency and water hardness.
Decalcify with a commercial decalcifier for coffee machines.

1.  Dose as instructed on the packaging or on the instruction 

leaflet.

2.  Operate the appliance as instructed for making espresso 

until the tank is empty. Let the solution flow through the 

group head (without filter holder).

  WARNING: 

• 

Rinse the water tank and let one full tank fresh water 

flow through the group head to rinse out the decalcifier 

residues.

•  Do 

not

 use this water for consumption.

Storage

•  Clean the appliance as described and let it dry com-

pletely.

•  We recommend that you store the appliance in its 

original packaging when it is not to be used for a longer 

period.

• 

Always store the appliance at a well ventilated and dry 

place outside the reach of children.