Krups XP320830 - Инструкция по эксплуатации - Страница 8

6

Descale your appliance regularly, as indicated in sections A and B for the coffee and steam 
functions, as this will help prolong its lifespan. The frequency of descaling depends on the 
hardness of your water. Consult your water supply authority for more information.
While descaling, do not place your appliance on a marble worktop. The descaling agent 
could damage it.

„

To help you, here is a table of reference for the frequency of descaling according to water 
hardness and how often your machine is used:

DESCALING 

1.  The appliance 

„

Unplug 

(J)

 before each clean and let the appliance cool down first. 

„

Clean the outside of the appliance with a damp sponge when you think it necessary. 

Regularly clean the tank, drip tray and its grill then wipe them down. 

„

Rinse the inside of the tank regularly. 

„

When a fine white layer appears in the tank, descale the appliance (refer to the section 

on descaling) 

„

Do not use alcohol or solvent-based cleaning products. 

„

After unplugging the appliance, regularly clean the head of the filter holder and the seal 

(E)

 using a damp sponge. 

„

Clean with a damp cloth only. Do not use detergent or abrasive products. 

2.  The filter holder 

„

Using a damp cloth, regularly clean the filter holder housing in order to remove any 

residual coffee that may have collected in this area. 

„

Do not remove the seal. Do not remove the screws from the filter and filter holder. 

This may only be carried out by an approved servicing centre. 

„

To prolong the life of the filtering head seal, do not refit the filter holder if the coffee 

machine will not be used for an extended period of time. 

3.  The drip tray 

„

If necessary, clean the drip tray 

(I)

 and its grill 

(H)

 using water and a little mild detergent 

(44-45)

. Rinse and dry.

CLEANING AND MAINTENANCE 

IMPORTANT!

 If you want to make a coffee after frothing milk, you shoud turn 

the thumb wheel to the espresso position   and then set the selection button 
to the espresso position. After few seconds, the coffee indicator will turn off. 
Turn the thumb wheel to function O and wait until the coffee indicator lights up.
During this operation, if the coffee and steam indicator lights are switched on at 
the same time, repeat the steps above.

IMPORTANT!
Warning! To prevent the milk from spattering, do not lift the nozzle out of the 
milk when using "steam" mode.

IMPORTANT!
Warning! The steam nozzle is still hot! Be careful you do not burn yourself!

IMPORTANT! After switching off the steam function, clean the nozzle 
immediately and carefully, as set out in the section: CLEANING AND 
MAINTENANCE