Кофеварка DeLonghi Nespresso ENV120.W - инструкция пользователя по применению, эксплуатации и установке на русском языке. Мы надеемся, она поможет вам решить возникшие у вас вопросы при эксплуатации техники.
Если остались вопросы, задайте их в комментариях после инструкции.
"Загружаем инструкцию", означает, что нужно подождать пока файл загрузится и можно будет его читать онлайн. Некоторые инструкции очень большие и время их появления зависит от вашей скорости интернета.
FR
PANNES
DE
FEHLERBEHEBUNG
IT
RISOLUZIONE PROBLEMI
ES
RESOLUCIÓN DE PROBLEMAS
PT
RESOLUÇÃO DE PROBLEMAS
CS
ŘEŠENÍ PROBLÉMŮ
PL
ROZWIĄZWANIE PROBLEMÓW
RU
УСТРАНЕНИЕ НЕИСПРАВНОСТЕЙ
NL
PROBLEMEN
OPLOSSEN
DA
FEJLFINDING
NO
FEILSØKING
SV
FELSÖKNING
FI
VIANMÄÄRITYS
33
T R O U B L E S H O O T I N G
EN
VERTUO / VERTUO NEXT / VERTUO PLUS
1
No light on the button.
• The machine has turned OFF automatically; push the button
or “UNLOCK” the machine.
• Check the mains, plug, voltage, and fuse.
2 No coffee, no water.
• Check that the water tank is filled.
• Check that a fresh capsule is inserted in correct position,
that the handle is properly locked and push the button to
start.
• Descale if necessary.
• Open the machine head and let the capsule be ejected.
Then perform a cleaning as per cleaning section.
3 Coffee is not hot enough.
• Preheat cup with hot drinking water from the tap.
• Descale if necessary.
4 Leakage or unusual coffee flow.
• Check that the water tank is well positioned.
5 Machine turns to “OFF mode”.
• To save energy the machine will turn off after 2 minutes of
non-use.
• See paragraph on “Energy Saving Concept”.
6 Coffee grounds in the cup.
• Perform the cleaning procedure twice.
• See paragraph on “Cleaning”.
VERTUO / VERTUO NEXT
7 The machine doesn’t start and
has light steady on. If blinking,
see next points.
• Check that handle is properly locked.
• If you want to brew a Coffee or Espresso, check that a fresh
capsule is inserted in correct position, that the handle is
properly locked and push the button to start.
• If you are cleaning, descaling or emptying the system, check
that no capsule is inserted then close, lock the machine and
push the button to start one of these operations.
8 The machine doesn’t start and
light blinks alternately; 1 blink
and 1 pause.
• Fill the water tank and push button to start.
• Check that handle is properly locked.
11
اهحلاصإو ءاطخلأا فاشكتسا
AR
UM_NEW LAYOUT_VERTUO_1.indd 33
UM_NEW LAYOUT_VERTUO_1.indd 33
31.03.20 09:21
31.03.20 09:21
