Braun KF 190 - Инструкция по эксплуатации - Страница 7

English

8

Our products are engineered to meet the highest 
standards of quality, functionality and design. We hope 
you thoroughly enjoy your new Braun appliance.

Caution
Please read the use instructions carefully and 
completely before using the appliance.

Keep the appliance out of reach of children. 
Before plugging into a socket, check whether your 
voltage corresponds with the voltage printed on the 
bottom of the appliance.

Avoid touching hot parts, especially the hotplate. 
Never let the cord come in contact with the hotplate. 
Do not put the carafe on other heated surfaces (such 
as stove plates, hot trays, etc.). 
Be careful when operating the function selector because 
hot steam will escape.

Before you start preparing coffee a second time, 
always allow the coffeemaker to cool down for approx. 
5 minutes (switch off the appliance), otherwise steam 
can develop when filling with cold water. 

Braun electric appliances meet applicable safety 
standards. Repairs or the replacement of the mains 
cord must only be done by authorised service 
personnel. Faulty, unqualified repair work may cause 
accidents or injury to the user.

This appliance was constructed to process normal 
household quantities. Always use cold water.

Maximum cups 

12 cups  ( à 125 ml ) 
18 cups  ( à 83 ml ) 

Description

1 Cord /cord 

storage

2 Function 

switch 

 = 

coffee 

    off 

 = 

steam 

3  Water level indicator 
4 Aroma 

selector

  = mild taste 
  = strong taste
 = 

cappuccino

5  Large tank (coffee) 
6 Space 

compensator 

7  Water filter cartridge
8  Dial for water filter exchange
9  Removable tank (steam)

10 Filter holder 
11 Steam 

tube 

12 Frothing 

attachment

13 Removable 

jet

14 Hotplate 
15 Pilot 

light

16  Carafe with lid

A  Setting into operation

When using the water filter cartridge (7) and exchanging 
it regularly, you normally will not need to decalcify. 
However, if your coffeemaker takes much longer 
than normal to brew, the coffee section has to be 
decalcified. 

To install the water filter cartridge, remove the space 
compensator (6) from the water container and insert the 
water filter cartridge ( 7 ). (Make sure to keep the space 
compensator as it has to be installed in the water 
container whenever the water filter cartridge has been 
removed, e.g. for decalcification).
 
After having installed a new filter, operate the appliance 
with the maximum amount of water without coffee 
grounds. 

Replace the water filter cartridge with a new one after 
two months of regularly using the coffeemaker. 
You may set the dial (8) to the month in which the water 
filter has to be exchanged.

N.B.

Before using the appliance for the first time, 
after a longer time of not using it, fill both tanks (5, 9) with 
water and let it run through.

B Making coffee

With this appliance you can vary the way you drink your 
favourite cup of coffee. You can either prepare coffee, 
cappuccino, café latte, etc. or use different types of 
coffee (flavoured, blended, espresso, etc.).

Fill the large tank (5) with cold water, put a No. 4 paper 
filter into the filter holder and fill 

with coffee grounds. 

Set the aroma selector (4)

 according to your preference. 

If you want to brew coffee for cappuccino, set the aroma 
selector to «

». 

Put the carafe on the hotplate and switch on 
the appliance by turning the function switch to the 
«

» symbol. 

Brewing time per cup: approximately 1 minute.

As long as the function switch is on position «

», 

the pilot light illuminates and the hotplate heats to keep 
the coffee hot.

C  Frothing milk or heating up liquids 

Fill the small tank (9) with water. Swing out the frothing 
attachment.  Hold a heat-resistant receptacle filled half-
way with milk under the frothing attachment so that the 
removable jet is immersed in the milk. 

However, do not immerse beyond the jet. 
Turn the function switch to position «

».