Melitta F 63/0-201 - Инструкция по эксплуатации - Страница 27

Venting

27

GB

You can set the water hardness by navi-

gating to 

Settings > Water hardness

 in the 

menu.

Water hardness

°d

°e

°f

Soft

0 to 10

0 to 13

0 to 18

Medium

10 to 15

13 to 19

18 to 27

Hard

15 to 20

19 to 25

27 to 36

Very hard

> 20

> 25

> 36

8.10  Using a water filter

The use of a water filter extends the service 

life of your appliance. The water filter filters 

calcium and other pollutants out of the tap 

water. 
If you use a water filter and change it on a 

regular basis, you will need to descale the 

appliance only once per year. This informa-

tion is based on an average of six 120 ml 

coffee beverages per day and six filter 

changes per year.
Only use Melitta® Pro Aqua filter cartridges 

for automatic coffeemakers. Observe the 

instructions on the packaging of the filter 

cartridge.
Use the screwing aid to screw the water 

filter into and out of the water tank.

Inserting the water filter

Change the water filter when the appliance 

asks you to do so. Use the coffee grounds 

container as a collecting container.

ƒ

Place the new water filter in a vessel 

filled with fresh tap water for a few 

minutes.

ƒ

Navigate to the 

Care

 > 

Filter

 > 

Insert filter

menu.

Changing the water filter

Use the coffee grounds container as a 

collecting container.

ƒ

Navigate to the 

Care

 > 

Filter

 > 

Change

fil-

ter

 menu.

Removing the water filter

ƒ

Navigate to the 

Care

 > 

Filter

 > 

Remove 

filter

 menu.

ƒ

Then adjust the water hardness (see 

section 8.9, page 26).

9  Venting

During venting, residual water is removed 

from the appliance. You should dry out the 

appliance whenever you do not use it for 

longer periods, if you want to transport it 

or if there is a risk of frost.
If the water filter is inserted, you will need 

to remove it from the water tank before-

hand. 

ƒ

Place a vessel beneath the outlet. 

ƒ

Navigate to the 

System

 > 

Venting

 menu.

After venting, the appliance will switch off.
Keep the water filter in a vessel containing 

tap water in the refrigerator so that it does 

not stand dry over a longer period.

10 Transport

Transport the appliance in the original 

packaging if possible. 
You may not fasten loose parts with 

adhesive tape or parcel tape because the 

adhesive residue is difficult to remove. 
When sending the appliance to Melitta's 

service centres, it is not necessary to send 

in the cup plate. This prevents scratches 

during transport.

Mel_013_LatteSelect_10_de_gb_fr_nl_it_es_dk_se_no_ru_pl_lt.indb   27

Mel_013_LatteSelect_10_de_gb_fr_nl_it_es_dk_se_no_ru_pl_lt.indb   27

23.10.2020   13:42:49

23.10.2020   13:42:49