Melitta Caffeo Solo & Perfect Milk Е 957-101 - Инструкция по эксплуатации - Страница 20

20

Before using for the 

fi

 rst time

General information

•  Only use pure water without 

carbonation. 

•  Use the supplied test strip to determine 

the hardness of the water used and set 
the water hardness („Water hardness 
and 

fi

 lter“, page 22).

Information for using for the 

fi

 rst 

time

The appliance must be vented before 
it is used for the 

fi

 rst time. To do so, 

the appliance may only be switched on 
without a Melitta

®

 Claris

®

 water 

fi

 lter and 

with a completely 

fi

 lled water reservoir.

•  Push the Cappuccinatore 

13

 onto the 

steam pipe up to the stop 

12

.

•  Place a vessel under the 

Cappuccinatore 

13

.

• Press the 

 button to switch on 

the appliance. 

 illuminates on the 

display. 

•  Turn the valve switch 

11

 clockwise until 

the stop. 

 illuminates on the display. 

Water will 

fl

 ow into the vessel.

• When 

 is illuminated on the 

display, turn the valve switch 

11

counterclockwise until the stop.

•  The appliance is ready for operation.
•  After using the appliance for the 

fi

 rst 

time, insert the Melitta

®

 Claris

®

 water 

fi

 lter if required (see page 22).

Starting up the appliance

Starting up

Warning!

Danger of 

fi

 re and electric shock 

due to incorrect supply voltage, 
incorrect or damaged connections 
and power cable.

–

Ensure that the supply voltage 
corresponds to the supply voltage 
speci

fi

 ed on the identi

fi

 cation label of 

the appliance. The identi

fi

 cation label is 

located on the right side of the appliance 
behind the cover (Image 

A

, 

14

).

–

Make sure that the power socket meets 
the applicable standards for electrical 
safety. If in doubt, contact a quali

fi

 ed 

electrician.

–

Never use damaged power cables 
(damaged insulation, bare wires).

•  Place the appliance on a stable, dry and 

level surface with suf

fi

 cient clearance (at 

least 10 cm) to the sides.

•  Push the Cappuccinatore 

13

 onto the 

steam pipe up to the stop 

12

.

•  Plug the power cable into a suitable 

power socket.

•  Remove the lid from the bean 

container 

8

.

•  Fill the bean container with suitable 

coffee beans.

•  Put the lid back on.
•  Lift up the lid of the water reservoir 

7

and pull the water reservoir up and out 
of the appliance.

•  Fill the water reservoir with fresh tap 

water only up to the max. mark.

•  Insert the water reservoir into the 

appliance.

•  Place a vessel under outlet 

2

.

BA_Solo_Perfect_Milk_042015.indd   20

BA_Solo_Perfect_Milk_042015.indd   20

20.04.2015   21:17:14

20.04.2015   21:17:14