Кофемашина La Pavoni LPMCSR02EU - инструкция пользователя по применению, эксплуатации и установке на русском языке. Мы надеемся, она поможет вам решить возникшие у вас вопросы при эксплуатации техники.
Если остались вопросы, задайте их в комментариях после инструкции.
"Загружаем инструкцию", означает, что нужно подождать пока файл загрузится и можно будет его читать онлайн. Некоторые инструкции очень большие и время их появления зависит от вашей скорости интернета.
24
25
EN
No froth forms on the coffee
1. The coffee blend is not
suitable for this type of
machine
2. The grinding is unsuitable
3. There is not enough
coffee
1. Replace the coffee
2. Adjust the coffee grind
3. Increase the amount
of coffee and compact it
properly
The coffee is too cold
1. The machine had not
reached the correct
temperature
2. The filter holder had not
been pre-heated
3. The cups have not been
preheated
4. The thermostat is not
working within the
required range
5. The PID temperature
controller (
11) is not
working within the
required range
1. Follow the instructions
given in section 4.1– 4.2
2. The filter holder should
be heated at the same time
as the water, see section 4.1
3. Heat the cups properly on
the cup warmer (
2)
4. Contact the SERVICE
CENTRE.
5. Set the value for the PID
temperature controller
The coffee is too hot
1. The PID temperature
controller (
11) is not
working within the
required range
1. Set the value for the PID
temperature controller
The machine does not
dispense steam
1. The circuit has not been
filled
2. The hole at the end of the
steam nozzle is clogged
3. No water in the tank
4. The turbo steam nozzle
has not been inserted
properly
1. See section 4.3 –
dispensing steam
2. Clean the hole with a
needle
3. See section 4.1
4. Insert the turbo steam
nozzle properly
The coffee leaks between
the boiler unit and the filter
holder
1. The filter holder is not
inserted correctly
2. There is too much coffee
in the filter basket
3. The edge of the filter
holder has not been
cleaned
4. The group head gasket is
worn
1. Insert it properly
2. Reduce the amount of
coffee
3. Remove coffee residues
from the edge of the
filter holder and clean the
group head gasket
4. Contact the SERVICE
CENTRE
The coffee is dispensed in
drops
1. The coffee is too finely
ground
2. There is too much coffee
3. The coffee has been
compacted too much
1. The coffee should be
ground more coarsely
2. Reduce the amount of
coffee
3. Tamp the coffee less
Характеристики
Остались вопросы?Не нашли свой ответ в руководстве или возникли другие проблемы? Задайте свой вопрос в форме ниже с подробным описанием вашей ситуации, чтобы другие люди и специалисты смогли дать на него ответ. Если вы знаете как решить проблему другого человека, пожалуйста, подскажите ему :)
