La Pavoni LPMCSR02EU - Инструкция по эксплуатации - Страница 22

22

23

EN

boiler with water and bring the 

machine to the correct operating 

temperature. Otherwise, the coffee 

may have a burnt taste.

•

Place an empty cup on the grid. Do 

not insert the filter holder. Fill the cup 

with water by moving the lever switch 

(

15) to position “I”. Once the cup is full, 

move the coffee lever switch (

15) to 

position “0”. It is now possible to brew 

more coffee.

4–4. HOT WATER

•

Make sure that you have carried out all 

the operations in section 4.1. 

•

Place a container under the hot water / 

steam nozzle

•

Open the knob (

4) and move the coffee 

/ hot water lever switch (

15) to position 

“I”; water will immediately come out of 

the steam/hot water nozzle (

6).

•

Once the required amount of water 

has been dispensed, move the coffee / 

hot water lever (

15) back to position “0” 

and close the knob (

4).

•

After dispensing hot water, make sure 

that there is still water in the tank (

1).

4–5. REGULATING THE BOILER 

TEMPERATURE 

•

The LPSCSR02 model is fitted with a 

PID temperature controller (

11).

•

PID temperature controllers regulate 

the boiler temperature.

•

The PID temperature controller is 

factory set to 92°C. 

•

To adjust the setting proceed as 

follows: 

- press the button 

; as soon as 

“PRG” appears on the display, press 

the button 

; 

- when the temperature of the boiler 

appears on the display, use the 

buttons  

and  to set the 

temperature, from a minimum of 80°C 

to a maximum of 120°C. 

- 3 seconds after having pressed the 

last button, the value is memorized 

and the display indicates the 

temperature. 

If the temperature threshold is set 

too high, the display will start to 

flash when coffee is dispensed.

5. CLEANING AND MAINTENANCE 

•

Before carrying out any cleaning or 

maintenance, unplug the power cable 

from the power outlet without pulling 

the cable. 

•

Do not immerse the coffee machine in 

water or other liquids.

•

Let the coffee machine cool down 

before cleaning. 

CLEANING THE FILTERS AND FILTER 

HOLDERS

•

Regularly check the holes in the 

filters in order to remove any coffee 

deposits.

•

Place approximately one litre of 

boiling water and four teaspoons of 

coffee machine cleaner in a suitable 

container. Immerse the filters and 

filter holders in the solution for 20-30 

minutes. Then rinse thoroughly under 

running water.

CLEANING THE STEAM NOZZLE 

•

To avoid altering the taste of the drinks 

to be heated and to prevent the hole 

at the end of the steam nozzle (

6) from 

becoming clogged, after use, turn 

the steam knob to dispense a small 

amount of steam and remove any milk 

from the inside of the nozzle.

•

Then clean thoroughly with a damp 

cloth.