Кофемашина Siemens TK 911N2 - инструкция пользователя по применению, эксплуатации и установке на русском языке. Мы надеемся, она поможет вам решить возникшие у вас вопросы при эксплуатации техники.
Если остались вопросы, задайте их в комментариях после инструкции.
"Загружаем инструкцию", означает, что нужно подождать пока файл загрузится и можно будет его читать онлайн. Некоторые инструкции очень большие и время их появления зависит от вашей скорости интернета.
21
Descaling
When
Machine to be descaled
appears in the display, the appliance must
be descaled without delay. To avoid the
possibility of damage, descale the appliance
according to the following instructions.
Use only descaler ordered via the customer
service department (Customer Service
Prod. No.: 31 0748) or the
Nespresso
-Club.
Caution!
Never descale the appliance using
vinegar or vinegar-based preparations!
Follow precisely the quantities stipulated
and the information displayed.
Never interrupt the descaling program.
Never drink the descaling fl uid.
Descaling program
The descaling program takes around
20 minutes. The display guides the user
through the program.
● Mount the nozzle
10
on the adapter
8
.
● Press the steam button
h
and keep it
depressed for three seconds.
● Using button
g
(Hot water), select
Start descaling procedure?
.
● Select
Yes
with the button
e
or
f
(small/
large cup).
● Press button
g
(hot water).
Display:
Empty container and press
steam button
● Empty the drip trays
11
and
12
and the
capsule container
13
, and put them back
in position.
● Press the steam button
h
.
Display:
Fill agent + water and
press steam button
● Mix together 100 ml
Nespresso
descaling
preparation and 500 ml water and remove
the lid
4
from the water tank
5
. Pour the
descaling solution into the empty water
tank
5
up to the mark, and replace the lid
4
.
● Position two adequately sized vessels
(approx. 600 ml) under the steam pipe
7
and the coffee dispenser
14
respectively.
● Press steam button
h
.
Display:
Descaling in progress
The solution fi rst runs through the nozzle
10
, then into the drip tray
12
and fi nally out
of the coffee dispenser
14
.
Display:
Empty container
● Empty, clean and replace drip tray
12
.
Display:
Fill water and press
steam button
● Thoroughly rinse out the water tank
5
and
fi ll with 1.2 l fresh water.
● After emptying the vessels, position them
under nozzle
10
and the coffee dispenser
14
once again.
● Press steam button
h
.
Display:
Rinsing
The appliance is now rinsed, initially into the
drip
12
, then through the coffee dispenser
14
and fi nally through nozzle
10
until the
water tank
5
is empty.
Display:
Empty container
● Empty, clean and replace drip tray
12
.
Display:
Ready
The descaling alarm is automatically
cancelled.
● Wipe the exterior of the appliance with a
damp cloth.
● Remove the coffee dispenser
14
and
capsule container
15
(Fig.
8
), rinse under
running water, and replace.
If the descaling procedure is interrupted, the
descaling alarm is not cancelled, and the
appliance requests the user to carry out a
full rinse as detailed in the display.
en
Характеристики
Остались вопросы?Не нашли свой ответ в руководстве или возникли другие проблемы? Задайте свой вопрос в форме ниже с подробным описанием вашей ситуации, чтобы другие люди и специалисты смогли дать на него ответ. Если вы знаете как решить проблему другого человека, пожалуйста, подскажите ему :)
