Bosch TES 50129 RW - Инструкция по эксплуатации - Страница 8

Robert Bosch Hausgeräte GmbH

8

en

Controls

Power on/off switch O / I

The power on/off switch 

O / I

 (9) is used to 

switch the appliance on or to switch it off 

completely (power supply off). 

Important: 

Before switching off, run the 

rinse programme or use the service button 

(12) to switch off.

Service button 

A

When the service button (12) is pressed 

briefly, the appliance rinses and switches 

off. If the service button (12) flashes, the 

service programme needs to be run. Press 

and hold the service button (12) to start 

the service programme. The service button 

(12) flashes while the service programme is 

running and turns off when the programme 

has ended.

Steam button 

B

Press the steam button (11) to generate 

steam for frothing milk.

Start button 

C

Press the start button (10) to start preparing 

a drink. Press again during drink prepara-

tion to stop the dispensing process early.

LED display

The various LEDs light up and flash to indi-

cate the following:

D

 lights up The water tank is empty and 

needs to be refilled.

D

 flashes The water filter is exhausted 

and needs to be replaced.

E

 lights up The bean container is empty 

and needs to be refilled.

F

 lights up The steam valve needs to be 

opened or closed.

F

 flashes Depending on the setting, 

steam or hot water is coming 

out of the milk frother.

G

 lights up When 

G

 is selected using 

the “coffee strength” rotary 

knob, the symbol lights up 

while ground coffee is being 

dispensed.

H

 lights up The drip tray is missing or has 

not been inserted correctly. 

Insert the drip dray.

H

 flashes

The trays are full. Empty the 

trays and reinsert them.

I

 lights up The brewing unit door is open. 

Close the door.

I

 flashes Remove and clean the brew-

ing unit.

TES501_Heft1_RW.indb   8

14.09.2011   16:10:22